Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
Некорректная работа со сторонним ПО
Здравствуйте.
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Система:
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
Dégragmentation
Bonjour,
Lorsque j'effectues une défragmentation de mon ssd avec l'option pour sdd, ils reste des carrées en rouge.
J'ai sélectionné dans les options 'tous les fichiers'.
Egalement l'indicateur ne se met pas a 0%
Cordialement
Denis Schmitt
Error 0xc1900101
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
програма блокируется антивирусом
BoostSpeed 12 програма блокируется антивирусом McAfee life Safe
Прорамиа Auslogics BoostSpeed 11 Pro работает.
ОС: Windows 10 . Версия 1703 Сблорка ОС 15063.1382
TaskManager.exe
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Intermittent PC Crashes/Freezes
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
empty folder cleaned doesn't work
When I click on the box to do away with empty folders, nothing happens. It used to work but I stopped it in the middle of its job.
Обновление Windows (системы безопасности) появляется синий экран
При загрузке и установки обновлений виндовз (Windows Update) появляется синий экран смерти. Я вынужден отключить Windows Update и уже больше двух месяцев не выключаю ноутбук (не перезагружаю).
Как установить обновления что б не было экрана смерти?
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Cross mark on wifi symbol
Audio Bluetooh Problem
What do i do if when my wireless hadphones connect to the laptop the sound is still comming from the laptops speaker
BoostSpeed 11
Приветствую уважаемые! Во-первых:после оптимизации жёсткого диска"С" SSD c ОС , диск перестал открываться в предварительной программе запуска(BIOC) Windows 10 pro версии 1903, прекидывал диски местами результатов нет " Мёртвый" подскажите как его реанимироваь??? Пришлось записывать ОС на обычный жесткий диск. В цело мне ваша программа нонравилась - поддержка обяного жесткого диска значительно лучше чем другие...
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb