1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

WIFI droping

Network WiFI keeps disconnecting after system hinernates. Does not recognize router or ISP
1040 views
Nov 06, 2020 at 03:53 AM

Start Up

AOL Software Problem:
I have AOL Desktop Gold & it worked good for a few years, then when I signed in, the orange ball appeared, and after that, nothing; AOL trtied to fix it, via reinstall but couldn't. Any suggestions?

I have aused Hewlette Packard Desktop PC, was Windows XP Now Windows 7. Petium 4 processor, 2GB Memory
1039 views
Aug 27, 2021 at 04:56 PM

will this make my pc as fast as it was when i powered it up for the 1st time?

will this make my pc as fast as it was when i powered it up for the 1st time? - will boost speed 12 pro resolve this issue?

when i turn my pc on it takes like 30 sec to get to the windows screen where it use to take less than 3 seconds - will boost speed 12 pro resolve this issue?

my pc seems to lag and slow down while having multiple programs open and running at the same time where when it use to not do this. - will boost speed 12 pro resolve this issue?

internet speed seems extreamly lower than ususal - will boost speed 12 pro resolve this issue?

auslogics driver updater shows the same driver needing updating over and over like its not doing its job - why is this?? - does the program not work??? - will boost speed 12 pro resolve this issue?
1039 views
Jul 31, 2021 at 02:51 PM

Support?

Hi! Is there a plan to support the Opera GX browser? I have been using this broswer for my web serching needs. It's pretty good. However, Auslogis BoostSpeed is not recognizing the browser as a supported browser. Thank you for taking the time to read this question.

1038 views
Nov 27, 2020 at 11:39 AM

Settings

The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.

1036 views
Jun 09, 2021 at 10:03 PM

auslogics boostspeed 12

купил версию про, получил ключ почему не активируется про версия
1036 views
Jan 21, 2022 at 10:50 AM

boostpeed 11

I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.

1036 views
Jan 03, 2020 at 11:19 PM

проблемы с Auslogics BootSpeed 11

Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?

1035 views
Jun 15, 2020 at 04:08 PM

PROVING

How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
1035 views
Oct 22, 2020 at 01:46 AM

Зависание

Добрый вечер! Сегодня завис компютер и никак не отвисал, пока не выключил с кнопки, совсем недавно была установлена система и диск ссд

1034 views
Dec 12, 2020 at 04:01 PM

question

how to enable switching mode?

1034 views
Dec 28, 2020 at 07:58 AM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

High system usage

My computer always says high system resource usage detected.

1032 views
Jan 15, 2021 at 07:30 AM

Problem Solution

In the "check for updates" section, i have a message in red "Your device is missing important security and quality fixes" and when i click on "check for updates", the installing remains 0% and so i want to kmow how to solve this problem.
1031 views
Jun 13, 2021 at 06:33 AM

update

so my windows 7 ultimate needs upadate to windows 10 so tryed to update it but it randomly shut off. i tryed again but it huppened again. so i though it was the update thats not working. i was playing a game but it huppend again. it made a lot of noise and shuts off without warning so i did i everthing i cold to fix bt cant seem to fix it at all. what should i do. i need to update it but to update it i need it to stop randomly shuting off

1030 views
Jan 15, 2021 at 02:14 AM

older auslogic boostspeed

dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work

dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,

Content hidden to protect privacy
or | santa9785 |

1030 views
Nov 05, 2019 at 03:55 AM

update 11.2.0.1

How to update Auslogics BoostSpeed 11 ? in

Content hidden to protect privacy
?

1029 views
Nov 23, 2019 at 10:34 PM

Boostspeed Background Optimization

Hi,

I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?

Regards,
Rishi
1029 views
Jun 15, 2021 at 04:15 PM

printer problem

Can you tell me why on my desktop, it show my default printer is Pixma series 5600. On my wife's laptop id shows Pixma series 5600WS?
1029 views
Jul 18, 2021 at 12:10 PM

Desktop

I have lost my icons on the desktop!
1028 views
Oct 08, 2020 at 02:28 AM