1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

941 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

загрузка Windows

Очень медленная загрузка Винды
1028 views
Nov 07, 2021 at 11:29 AM

une question ..

bonjour, ce n'est pas une question relative a un probleme .. je voudrais savoir comment programmer et installer le lpgiciel pour quil gere seul la meilleur mise en bonne condition de fonctionnement de mon pc sous windows 10 ? Cdlt à vous lire
fred TESSiER
fred34750

Content hidden to protect privacy

1028 views
May 12, 2020 at 11:34 AM

where is the update button for Bootspeed 12 Pro

Cant find the upate button to update

1027 views
Feb 12, 2021 at 05:16 AM

Perfomance for...

How can I optimize Windows for GTA V for maximum performance?

1027 views
May 27, 2020 at 04:35 PM

Indexing keep turning off

Greetings
I noticed that my Auslogics BoostSpeed 11 keeps turning of my windows search indexing. How can i prevent that from happening.
regards
1025 views
Sep 14, 2021 at 08:44 AM

Software Problems with Printer

Hi! Everytime that I run Auslogics, that scans my computer for errors, cleans websites, etc.), my printer stops connecting properly with my computer. It appears that it affects the drivers. I have to clean out the printer, reinstall, etc., that takes a great deal of time. Your program speeds up my computer, which is great. But this repeated problem with my printer is a serious issue. Is there anything that I can do to stop this problem. You might need more information to solve the issue. I am happy to provide it.

1025 views
Jun 06, 2021 at 08:16 PM

Автозагрузка Auslogics File Recovery 10.1.0.1

Здравствуйте, у меня вопрос по программе "Auslogics File Recovery 10.1.0.1". Она постоянно загружается при запуске Windows 7 Pro. (в трее). Хотя я и убирал запуск этой программы из автозагрузки, всеми способами. Помогите пожалуйста решить вопрос с отключением автозапуска "Auslogics File Recovery 10.1.0.1".
Спасибо

1024 views
Aug 30, 2021 at 12:34 AM

sleep mode

after running my pc from sleep mode the voice of pc become weak .

whats the problem ?

Thank You
1023 views
Jun 23, 2021 at 09:04 PM

Contex menu delay on desktop shortcuts and explorer folders

When I right click on a shortcut on the desktop or on a file folder in the file explorer it can take up to 2 minutes to come up. Once it does everything exicutes normaly. If I right click on an empty space on the desktop or on a file in the explorer the contex menu works as it should.
I have uninstalled cortana, disabled all contex menu options with this program, and checked and repaired all regestery items. I don't have any idea what else to do. I use the right mouse click a lot and when the delay happens it is very disruptive to workflow.

1023 views
Apr 20, 2022 at 05:45 PM

Deleting A folder and file

Hi there,
How can I delete a file and folder that won't delete?

1022 views
Nov 26, 2019 at 05:17 AM

please solve driver problem

my computer show unknown device please solve driver problem

1022 views
Dec 10, 2019 at 02:05 PM

DNS

How can i change DNS?

When i changed, this program will turn it back.

And i cant play some game because my network, how can i fix it?

1021 views
Dec 08, 2020 at 07:16 PM

Can't scan disk space

I've been using BoostSpeed successfully on Windows 7 for many years. It hasn't been working for the last 2 months. When it scans the disk space, it gets stuck on a temporary Skype file, and stops scanning. To fix this, I have to re-start my computer, and re-install BoostSpeed 12. My computer has been running painfully slow for the last 2 months. PLEASE HELP!
1021 views
Feb 26, 2021 at 07:40 AM

Startup

Besides the startup manager, how can I boot up faster?
1021 views
Jun 15, 2021 at 02:06 PM

Payment

When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.

The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.

Anyway, i hope you all have a nice day and take vare of yourselfe.
Mikael

1020 views
Oct 14, 2019 at 04:00 PM

Icone

Bonjour,

Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert

Cordialement
Denis Schmitt

1019 views
Nov 07, 2021 at 04:32 PM

いつもエラーが出て困っていて、このソフトで解消できるようになりませんか?

ファイル C:\Users\BAMOTO\Desktop\●●画像●●\新しいフォルダー (6) のバックアップ中に問題が発生しました。
エラー:(STATUS_WAIT_2 (0x80070002))

バックアップとるとこのエラーが出てバックアップに支障が出ています
どうにかなりませんでしょうか?
ネットで調べてもこれと言って解決策が見つかりません

このエラーがこのソフトで解消できるようになればよいのですが
よろしくお願いします
1019 views
Apr 16, 2022 at 01:54 AM

Autostart

warum wird disk defrag 10 ständig mit geladen beim start - es ist nicht möglich den autostart zu unterbinden - auf dauer ist es mir zu mühseelig ständig disk defrag zu deinstalieren und vor gebrauch wieder zu instalieren - meinem chef muße ich das programm auch wieder ausreden nachdem ich ihn davon überzeugt hatte es auf allen rechnern in der firma zu instalieren

1019 views
Jul 23, 2021 at 05:30 PM

Missing subcategory

What is the correct subcategory for a software question for Auslogic products such as Boostspeed, Disk Defgrag, etc.? The "Ask a Question- New Question" screen will not allow a Subcategoty that is not on the drop down list.

1017 views
Jul 21, 2021 at 09:41 PM

Very long time to load the computer! HElp!

can you help me please, I have a laptop that takes a long time to load please help me

1017 views
May 17, 2020 at 07:40 AM