1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Adding WiFi to HP EliteDesk G2 TWR that does not seem to have WiFi built-in

I have HP EliteDesk G2 TWR with motherboard specs per below. I need to have WiFi as a back-up to existing LAN hardwired internet connection. It does not seem to have WiFi as option built-in. I bought Netgear Model A7000 AC1900 WiFi USB adaptor, and i installed software etc,,, but that does not seem to work either. Per motherboard specs below there would appear to be two open slots available.

1. Any suggestions as to getting the external WiFi USB adaptor that I already bought to work?

2. or do I need to get/install some sort of PCI wifi adaptor/card?
Or what... help?

Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available


Name, Value
Motherboard
Manufacturer: HP
Product: 8053
Version: KBC Version 05.39
Serial Number: PESUC0ECY9Y2X0
Ports: 38
Slots: 4

Ports
Port Connector 0: Keyboard Port
Port Connector 1: Mouse Port
Port Connector 2: Serial Port 16550A Compatible
Port Connector 3: Serial Port 16550A Compatible
Port Connector 4: Video Port
Port Connector 5: Video Port
Port Connector 6: Video Port
Port Connector 7: Network Port
Port Connector 8: Audio Port
Port Connector 9: Audio Port
Port Connector 10: Audio Port
Port Connector 11: Audio Port
Port Connector 12: Audio Port
Port Connector 13: USB
Port Connector 14: USB
Port Connector 15: USB
Port Connector 16: USB
Port Connector 17: USB
Port Connector 18: USB
Port Connector 19: USB
Port Connector 20: USB
Port Connector 21: USB
Port Connector 22: USB
Port Connector 23: USB
Port Connector 24: 8251 Compatible
Port Connector 25: 8251 Compatible
Port Connector 26: 8251 Compatible
Port Connector 27: 8251 Compatible
Port Connector 28: 8251 Compatible
Port Connector 29: None
Port Connector 30: None
Port Connector 31: None
Port Connector 32: None
Port Connector 33: None
Port Connector 34: None
Port Connector 35: None
Port Connector 36: None
Port Connector 37: Keyboard Port

System Slots
Slot1 / X16PCIEXP: In Use
Slot2 / X1PCIEXP1: In Use
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available

BIOS Details
Name: N01 Ver. 02.47
Manufacturer: HP
Version: N01 Ver. 02.47
Copyright: HPQOEM - 0
Date: 4/28/2020
Size: 16,384 KB
1693 views
Sep 16, 2020 at 05:48 PM

Hard Disk usage 100 percent

Why The Hard Disk of windows sometime use at 100 percent and really slow down computer ?

1692 views
May 14, 2020 at 01:51 PM

changing language

Hello

I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .

greetings bottlecup

1669 views
Oct 14, 2019 at 10:47 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1663 views
Apr 19, 2020 at 06:26 AM

Language Hangul cannot be written

Language Hangul cannot be written

1657 views
Jun 05, 2020 at 10:35 AM

Slow browser and switching applications

I believe I have run all of the BoostSpeed tools. However, my system is now just slow...

There are long delays when switching apps (i.e., I had to close BoostSpeed with Task Manager and reopen it to avoid a interminal hour glass when opening this form)

Opening new broswer tabs can take 10s of seconds to forever. i primarily use firefox and have tried clearing the cache and cookies. The loading indicator on the tab just keeps cycling, sometimes even after the screen refreshes it keeps cycling.

I use Norton, but I do not think it is blocking anything. One thought, I may have unintentially disabled a needed start-up application I checked the interet speed here and its 1MB down and 5MB up... At home I have the same problems with >100MB. I'm using a new Lenovo Yoga , windows 10 PC.

Let me know if I can run/export anything to help you..

Thank you, Jim Winer
1656 views
Nov 24, 2020 at 03:41 PM

Disk Drill 4.1.551.0

Estoy intentando desinstalar esta aplicacion, que ralentiza mi PC, y no lo consigo. Agradeceria sus instrucciones y comentarios.
Me estoy iniciando con su BOOSTSPEED y me parecen excelentes todas las soluciones que ofrece.

Gracias anticipadas y un saludo.

Carlos Martinez
1639 views
Feb 07, 2022 at 05:45 PM

Having to re-enter my Microsoft account info many times.....

Like your program. However it knocks off all Microsoft "connections" making me have to re-enter my PW frequently to stay signed in to my account. Getting annoying.
1637 views
Aug 29, 2019 at 02:39 PM

Unable to reclaim disk space on WD My Cloud Home

Dear sirs,

I've bought a WD My Cloud Home. The device states that from a storage of 7 TB there is only 1.4 TB available, although I have only stored 3.5 TB on the drive apparently it is using hidden folders for a backup process but as I also have a MyBook installed I can't find any of the settings to disable the backup process.

Sicko
1636 views
Dec 07, 2020 at 05:21 PM

Offline Defragmentation

Is it possible to do offline defragmentation of system files using BoostSpeed 11

1627 views
Feb 07, 2020 at 12:13 AM

Настройка RDP

Windows Server 2016. Как настроить удаленный доступ к этому серверу через RDP? Все где надо включено, а доступа нет. Выдает ошибку "Произошла внутренняя ошибка". Причем к другому серверу с Windows Server 2016 доступ есть.

1618 views
Feb 11, 2020 at 06:22 PM

Dashboard popup

Hello,

I have asked this question before and the help I got didn't help one bit.

The Dashboard keeps popping up at the most inconveniant times to the point of be annoying.
When the Dashboard pops up everything stops until I acknowledge it or close it.
It always pops up while I'm gaming, while working with photos, reading my e-mail, and even while I'm working with my annimation programs and interfears with anything else to the point I'm beginning to think you created a virus program.
This has got to stop.
The other previous versions never did this and Im not the only one having the same problem.
I have several friends and family members I talked into buying this program who are having the same problem with theirs also.
Thats Seven (7) people besides me who are about to ask for refunds if we can't stop the Dashboard popups.
I have tried everything I could find from unchecking notices to automatic maintinance and the popups still continue.
Even the suggestions you gave me didn't help stop the pops.

Our 60 days is coming up on the 17th of this month for asking for our refunds.
Help us or refund us.

Thanks again, I think,
Stephen M.

1615 views
Jun 08, 2020 at 08:17 PM

Microphone went off

after doing an optimization, my mic won't work anymore .. how can I fix that ?

1603 views
Feb 24, 2020 at 12:30 PM

Acronis

Cannot install Acronis S/W. Cannot uninstall Acronis Common Components

1602 views
Jan 09, 2020 at 03:51 PM

Bootspeed 13

What about Bootspeed 13? Is it possible to do somethings to have Bootspeed 13 in place of Bootspeed 12 without payement?

1600 views
Feb 25, 2022 at 11:38 PM

Shut and Restart

Can you try and establish just why I cannot shutdown or restart my desktop Windows 10 2004 64-Bit? I get a BSOD with error message of driver power state failure
1592 views
Jul 07, 2020 at 11:52 AM

BLUE SCREEN IN WIN10 PRO IN RESTART AFTER INSTALLING MICROSOFT FLIGHT SIMULATOR ONLY

Hi there , don't know what to do but after installing Microsoft Flight Simulator 2020 windows unstable and when i need to restart PC i got blue screen crash. After uninstalling FS2020 everythink is back in normality. Cant find the answer on google , nor Microsoft support service . Ths if you help me with that , cheers.
1590 views
Jan 31, 2021 at 11:24 AM

スキャンするとリモートデスクトップの履歴が消えてしまう

お世話になります。
リモートデスクトップを使って別のコンピュータと接続しています。
スキャンを実行すると記録されていたIPが初期化されて無くなります。
除外リストに「HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\*」を設定しましたが、効果がありません。
他に、Microsoft Print to PDFの保存に使用したフォルダがスキャンするとドキュメントフォルダに初期化されてしまいます。これも除外リストに
「HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\*」を指定したのですが、効果がありません。
このようにWindowsが保存しているIPやフォルダを残すにはどうすれば良いですか。

1581 views
May 23, 2020 at 03:02 AM

Microsoft Visial C++

Hi

I keep getting a message pop up (see attatched)

I have no idea what I have done to cause it to pop up, I also have no idea how to cure it. I have the latest DirectX and as far as I know everything else is up-to-date including Windows.
Most of the time I just hide the message because if I cancel it, it pops back up. However it is now preventing me from launching Unreal Engine so I cannot ignore it any longer I need to sort it out.

Please priovide your answer in simple terms as although I am computer savvy I am no master under the bonnet,programming etc.

1580 views
Feb 09, 2020 at 03:47 PM