Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
My mouse freezes, lags which was not doing in the past
My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.
I formated everything on my computer (because this was not the case until very recently) but even that didnt help.
What can be the reason?
Browser Protection
In Advanced Mode.... under Browser Protection.... why does the scan/repair "skip" and not delete some items?
Windows Live Affected by first scan
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Windows 10 Action Center is not working
computer very slow
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
системные файлы windows 10
благодарю за ответ...
BNP detected fatal error
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
востоновление системы
добрый день, как ваша система моет навредить компьютеру или системе, она внесла изменения на пк отключила достуа к микрофону и камере, но я включил, я попытался сделать востоновления виндоус но очень долго востонавливаетет реестьр, я так и не дождался и перегрузил пк и теперю боюсь что ваша программа внесла изменения и придется переустоновливать виндоус, что делать, так вроде вск работает, как проверть, правильно ли работает щас система? спасибо
BSOD
How do I fix?
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
SurfShark VPN problem with DNS wire???? with BS and Surfshark .3.0
Auslogics BoostSpeed software itself
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
Про производительность компьютера
Я хотел повысить fps помоему я снял что-то с диспетчера задач,и вводил команды в консоль в игре CS:GO в мастерской карте BENCHMARK. И, до этих изменении у меня было около 70-100 fps, а сейчас fps 40-60. Что мне делать? Подскажите, пожалуйста!
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Auslogics Boostspeed 12 problem
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
Location is turned off and GREYED OUT.
logiciel trop lent et pas trés maniable
Re bonjour Auslogics Team,
Ne me trouvez pas trop insistant mais j'essaie par tous les moyens d'utiliser votre nouvelle version ABSP 11.
Il est trop lent,il bloque ma machine en permanence alors qu'avec le 10.24 et avant cà fonctionnait super.
Faites quelque chose dans cette direction.J'ai essaié de rajouter un ficher langue LNG français mais cà ne marche pas
avec votre nouvelle version.Pensez qu'il n'y a pas que seulement l'anglais dans le monde [L'australie est une ancienne
colonie anglaise] mais tout de même.
Salutation.r.t.