1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

941 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
987 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
871 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1761 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

wifi and bluetooth issue

my wifi is not working
865 views
Jan 08, 2022 at 04:50 AM

Duda

Estimados amigos:

He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.

¿Qué tan cierto es esto?

Feliz año 2021.
865 views
Dec 30, 2020 at 11:45 PM

Passwords

How to stop from Deleting Passwords in OPERA
864 views
Nov 26, 2021 at 05:00 PM

windows problems

duplicate file finder
863 views
Jul 16, 2022 at 02:00 PM

Restricted volume on a new hard drive

I installed a 3 TB hard dive on my desktop. I can only use 2TB with Wndows 10. How can use all of the new hard drive?
862 views
Aug 10, 2019 at 02:02 PM

Auslogics Boostspeed 13 TRIMMING SSD Hang at 3% unable to complete SSD Optimization

When running Disk Defrag Optimization Auslogics Boostspeed 13 Pro hangs at 3% "Preparing" when running TRIMM on external SSD and creates a file on external SSD with the following each time Optimization is run:
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.

Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
862 views
Feb 25, 2023 at 12:25 AM

no responcive pc

after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
862 views
Apr 21, 2021 at 04:11 PM

Recuperación de la RAM

Hola:
Tengo Un HP Elitedesk con 16 GB RAM, disco NVMe de 512 GB, Procesador I7 Octava Gen (Modelo Elitedesk 800 G4), con Windows 10 Pro actualizado todo a la ultima version. Este equipo trabaja muy bien y rapido...pero al utilizarlo con varias aplicaciones que tengo que abrir simultaneamente (TradingView Desktop, Binance Desktop, Metatrader 5 y Brave Browser), el equipo trabaja perfectamente, pero al pasar unas horas y yo cerrar algunas pestañas en las apps, y abrir otras, e incluso reduciendo su numero, la RAM no es recuperada y me quedo sin memoria. Hay alguna manera de automatizar la recuperacion de la RAM asi esto no me suceda mas? Tengo la Virtual Memory de Windows en cero, ya que tengo un disco duro de estado solido y no quiero que sea usado para swap para prologar su vida util.
861 views
Oct 29, 2021 at 09:21 PM

SSDをHDDと認識している

どうもPCのSSDをHDDと認識しているようで、スキャンすると毎回デフラグしてしまっている。これではSSDの寿命を縮めるのではないかと心配である。ちゃんとSSDと認識させるためにはどのようにすればよいのでしょうか?
859 views
Sep 08, 2021 at 03:18 PM

Auslogics BoostSpeed 12について

「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか?
859 views
Dec 24, 2021 at 11:25 PM

Windows 11

I've upgraded to Windows 11. Are there any issues using BoostSpeed with Win11 that I should be aware of?

Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
859 views
Jan 14, 2022 at 08:13 PM

Bluetooth sound

Hello,
My airpods have sound on my phone, however it does not on my recently bought laptop, the laptop is relatively new, from this year, 2021. ( HP ENVY x360 15-ed1250nd - 2-in-1 Laptop - 15.6 Inch ) link: https://www.bol.com/nl/p/hp-envy-x360-15-ed1250nd-2-in-1-laptop-15-6-inch/9300000016569206/?Referrer=ADVNLGOO002021-G-113260400617-S-1073395452187-9300000016569206&gclid=CjwKCAjwqvyFBhB7EiwAER786fS7dpKIseiChs-oaUUNjwv4nVDV44PuNyouNTdn7ZBDePH-zAaTFRoCDbgQAvD_BwE , this link is in dutch though since I am dutch.
But back to the question, I have two options, Airpods handsfree AG audio, and airpods stereo.
the "airpods handsfree ag audio" one works, though it has really really poor quality,
on my phone it works perfectly with perfect quality, but if I put my laptop on airpods stereo, they just don't work, no sound, nothing
I clicked on many links trying to fix this problem, but with no success, I don't know what I should do, do you guys know how to fix this?
Thanks!
Sjoerd
(ps my phone is a huawei p20 lite and I have airpods 2)
859 views
Jun 08, 2021 at 06:55 PM

tentative de modification de DNS

Bonjour,
Je voudrais savoir pourquoi, depuis que j'ai installé le VPN Cloudflare Wharp sur mon pc, je reçois très souvent, plusieurs fois par jour, des alertes Boostspeed 12 m'indiquant une tentative de modification de DNS (cf. pièce jointe).
Y-a-t-il un moyen d'y remédier ?
Merci, cordialement.
859 views
Aug 17, 2022 at 10:11 AM

pro version

I purchased boot speed pro #

Content hidden to protect privacy
but the program is asking me to activate pro version. Why is this happening? What should I do.

859 views
Jan 24, 2022 at 06:23 PM

Laptop slow on startup

Hi there,

I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.

I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...

I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.

Any ideas before I try the Windows 10 reinstall?

NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
857 views
Dec 27, 2021 at 11:14 AM

boot speed

Dear Sir,

I had purchased your software to solve issues like slow booting , taking more time in opening software etc

Till today after running all programs from your software , I find no improvement in boot speed etc.

Please let know how to solve the problems

regards
t k venkatesh
857 views
May 25, 2021 at 02:51 PM

Производительность ПК

Ваша программа периодически выдает сообщение о перегруженности процессора моего ПК и отсылает к "подробностям". А подробности - это сканер всех работающих и неработающих программ в компьюторе. Ваш сканер при этом никоим образом не оценивает важность запущенного процесса для работы компьютера. По сопровождающим характеристикам определить возможность отключения того или иного процесса очень трудно. Тогда какой смысл ваших обещаний "оптимизировать работу компьютера", если инструментов, реально выполняющих эту фунцкцию в части отключения второстепенных процессов, вы не предлагаете?

857 views
Jan 12, 2021 at 04:03 AM

High CPU Usage

My CPU usage shows almost 100% for sometime when I start my system or even sometime while working too. It remains at 100% for almost 15 - 20 min or more even when application is open. I tried all options in Auslogics to resolve it out but nothing is working.
Please suggest for any further option which can help out.
856 views
Feb 18, 2022 at 04:22 AM

How to prevent the software from deleting cookies of Bank and Credit cards

I have Banks and Credit Cards that I use regularly. I don't want to have problems of logon to them every time I use the Bootspeed to scan the system. The Bank that I hvae problems after the Bootspeed scan system Is Bank of American.com, Chase Bank logon. Visa logon, American Express .com Credit Card logon. Please help me to resolve these problem. Thank you,

Content hidden to protect privacy

855 views
Nov 30, 2019 at 01:59 AM

new computer

I have a new computer that is online now, the old slimline is gone. How do I move my current contract to cover my new computer.The order number is 3740428-4830463. Thank you
853 views
Feb 19, 2022 at 11:57 AM