1859 questions

display settings/function

My 'brightness control' slider dissapeared in Windows 10 and I can't figure out a way to get it back. Now the screen just stays fairly bright all the time. There also isn't one in the notifications tab that I could us instead of the missing one on the desktop.
911 views
Nov 23, 2020 at 02:01 PM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1430 views
Nov 19, 2020 at 11:45 AM

MSFS

Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous

2015 views
Nov 19, 2020 at 10:31 AM

код12

Добрий.Подскажите што мне делать в такой ситуации?

1072 views
Nov 18, 2020 at 05:12 PM

Upgrading Windows Vista to 10

I have an old Vista laptop and it's pretty slow. Can I upgrade it to Windows 10? Can I use BoostSpeed on Vista?
1069 views
Nov 18, 2020 at 03:42 PM

rescan

When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder

985 views
Nov 16, 2020 at 04:48 PM

ONEdrive freezing PC

How to improve onedrive velocity?
1417 views
Nov 15, 2020 at 04:59 PM

Видеокарта

Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.

1086 views
Nov 14, 2020 at 04:29 PM

Problema con servidor de internet y administrador de dispositivos

Whenever I restart my pc, it does not want to connect to the internet, it appears connected but does not open internet pages, and the error solver says, it fails in the router dns, but it is not that, because in other devices it works fine, I must restart the internet modem or take out the ethernet cable until the line comes back, my service provider came and checked with his laptop, it works fine, they told me there is a problem on my pc. To connect the ethernet cable I use a HUB (photos) because my laptop does not have a direct connection to ethernet, and for some time, when I installed AUSLOGICS BOOTSPEED, I did some programming and it gave me an error in the device driver desktop, I don't know if that is doing something on my pc, I don't like to be connecting and disconnecting the ethernet cable, because it is supposed to work, no need to reboot or remove the cable. Since I installed AUSLOGICS BOOTSPEED, I HAVE GOT SEVERAL BUGS IN MY PC, I DON'T KNOW IF THEY CAN HELP ME TO SOLVE IT. I already tried everything.
1519 views
Nov 13, 2020 at 07:22 PM

(0x8024a105)

Computor will not up date because it keeps saying something missing (0x8024a105) thats what is missing what is it?
1095 views
Nov 13, 2020 at 06:15 AM

iphoneの件

iphoneのバックアップを取る為、itunesにてバックアップを取るが。本商品でクリーンアップするとバックアップが消えてしまう為、バックアップ情報が消えない設定は教えて欲しい。

1180 views
Nov 13, 2020 at 05:57 AM

A Game Application

I keep getting an error code that says 0xC0000005 (0x0) N whenever i try and boot up the application and I'm not sure what it means or how to fix it. It tells me to scan and repair the application but that won't work either. I tried placing the file but it wouldn't let me.
1145 views
Nov 13, 2020 at 05:23 AM

Protect Doesn't Recognise MS Edge

It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.

BoostSpeed 11 still doesn't appear to recognise Microsoft Edge

1091 views
Nov 12, 2020 at 08:55 PM

Запретить windows кэшировать в mapping file

Добрый день. Иногда падают игры, с ошибкой на нехватку оперативной памяти. Проблема в том что WIN10 уводит в кэш слишком много памяти. На скриншоте 1.6гб+, но это после чистки. было 10гб.
Используя RAMMap.exe выявил что те 10гб были схаваны Mapped File: standby. Почистил. но сейчас опять память утекает..
как можно отключить это недоразумение?
Служба SuperFetch отключена. Что еще может жрать память и не отдавать её?
1065 views
Nov 12, 2020 at 02:19 PM

Siempre se sobrecalienta el cpu al 100%

Veo en el admin de tareas y dice integrator.exe usando 56% de cpu y optimizer.exe dice 23%
1114 views
Nov 12, 2020 at 01:32 PM

Intermittent PC Crashes/Freezes

To Whom It May Concern,

I intiated my original correspondence on the 5th November as indicated below:

I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.

This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!

I await an update at your earliest available opportunity.

Kind regards,

Ian

Ian R. W

Dear Ian,

Thank you for posting your question on our forum.

The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.

Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.

Running the command "sfc / scannow" in CMD under the admin might help with the issue.

You can also send to our support logs with system information and event viewer so that we can better understand the issue.

To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.

To get logs from event viewer, please do the following:

1. Press the key combination "Windows" + "X"

2. Select "Event Viewer"

3. Expand the "Custom Viewer" subsection

4. Select "Administrative Events"

5. Expand the "Action" menu

6. Click on "Save all events in custom view as ..."

7. Save log to PC

If you need any further assistance or have any other questions, please do not hesitate to contact us.

Upvote (0)

Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,

Your prompt response to my request for technical support is very much appreciated.

Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.

At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.

I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.

Kind regards

Ian

Ian R. W

[/private]
Dear Suzanna,

Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.

Kind regards,

Ian

Ian R. W

1059 views
Nov 12, 2020 at 01:09 PM

battery not charging

my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.

1356 views
Nov 12, 2020 at 12:01 PM

playing videos

This morning I could play videos from the internet and tonight I'm not able to. Please give me suggestions to fix this.

The error message says:

(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss


Lori
1002 views
Nov 12, 2020 at 01:29 AM

archivos duplicados

como eliminar archivos duplicados
1072 views
Nov 10, 2020 at 11:53 AM

Не очищается корзина

Не могу очистить корзину,требуется разрешение администратора компьютера,кроме меня больше нет пользователей на этом компьютере !
Восстановить файлы не получается,очистить нельзя,вырезать тоже,проверял компьютер на вирусы и делал проверку дисков,всё хорошо
Что делать,как очистить корзину ? Меня это очень раздражает !
Windwos 10 x64

1082 views
Nov 09, 2020 at 07:12 AM

auslogics boostspeed 12

I paid for pro why don't I have it
793 views
Jan 27, 2022 at 06:10 PM

Does this leave adult website traces

So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
791 views
Feb 11, 2024 at 03:12 AM

Empty folder function and Document file

How can I safely run Empty Folder file function without destroying important files, such as Document File???????
791 views
Mar 13, 2021 at 02:12 AM

Auslogics BoostSpeed

Game Mode...como ativar?
790 views
May 17, 2022 at 05:50 PM

Popups

How do I dasable the advertising popups in Boost Speed 12? I already own some of your products and don't want to be bothered with the advertising.

Also, when do you plan to have the problem with Boost Speed Pro resolved what it asks me if I want to activate the Pro version when I already have it?

Also, your subcategory required field above is not appropriate.
790 views
Feb 06, 2022 at 03:37 PM

Auslogic Defrag Issue

Defrag hung up on file C:\$Extend\$UsnJml:$J

Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?

Thank you
Dennis Miller

Content hidden to protect privacy


P.S. Why isn't Auslogics a subcategory option?

790 views
Dec 28, 2021 at 03:30 PM

Regestry

Can I use the registry to solve.......How can I turn off "Do you want to allow this app to make changed to your computer" popup for one specific app?

790 views
Jul 29, 2022 at 03:10 PM

Using the registry

Can I use the registry to change a single program not to show the "DO YOU WANT THIS PROGRAM TO CHANGE YOUR" ETC.
788 views
Oct 23, 2021 at 03:06 PM

Unable to move desktop icons

recently did cleanup and deleted some .ico files. checked Restore and files not located. cannot move desktop icons and a 1-2 minute delay using mouse with no ability to select programs on bootup since Auslogic installed. tried various workarounds via internet to no avail with no help on how to restore missing files. can copy/past icons but not move on desktop. no such problems since last bootup except mouse delay. not able to determine which file to send for review.
788 views
Mar 18, 2021 at 09:09 PM

Product will not activate

I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -

Content hidden to protect privacy

788 views
Jan 20, 2022 at 10:39 PM

Delete wrong user

After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
788 views
Jan 26, 2022 at 04:58 PM

WLan

Seit einiger Zeit wird mein Drahtlosnetzwerk nicht mehr in der Liste der verfügbaren Netzwerke angezeigt, ohne dass ich irgendwelche Änderungen vorgenommen hätte. Wie bekomme ich mein Netzuwerk wieder in die Anzeige?
788 views
Apr 29, 2022 at 12:53 PM

windows search

I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
787 views
Jan 04, 2022 at 09:49 AM

DRIVER UPDATER REFUSES TO CONNECT

Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
787 views
Sep 07, 2023 at 07:29 PM

не могу обновить ауслогик

почему не могу обновить программу ауслогик ?
786 views
Feb 03, 2022 at 09:10 AM

Quick Links in Word and Excel

How do I shut off the "feature" that wipes out all my quick links in Word, Excel, Etc. If I can't disable that POS feature I will remove your software and never consider upgrading.
785 views
Mar 12, 2022 at 06:45 PM

disable registeruserdevice

how can i disable registeruserdevice? File does not exist, and ias dangerous
785 views
Aug 10, 2022 at 11:33 AM

My Documents folder

Can I move the "My Documents" Folder to another location/drive?

782 views
May 21, 2021 at 12:10 AM

Греется жесткий диск

Последнее время стал сильно греться жесткий диск хотя запустил комьютер 20-30 минут назад, а уже хоть руки грей
782 views
May 27, 2021 at 10:08 PM

Windows.old

It is possible to delete a windows.old folder with Bootspeed 12 and, if so, how?

782 views
Mar 13, 2021 at 01:12 AM