taskbar\system errors\explorer.exe\overrun in slack based buffer
sobre boost speed 13
исчез диск
Explorer.EXE error code\ taskbar
Does this leave adult website traces
user-defined mode
I would like to speed up my PC. There is no real profile in Auslogistics BoostSpeed 13. I have to exclude the use for games from the outset. None are installed. At least not consciously. In addition to normal office programs from Office 365, I often use the Internet for research purposes and have the complete Adobe package from CreativeCloud. I have now noticed very often that my PC freezes or that memory capacities are probably fully utilized. But I can't see any evidence or the cause anywhere. I copy the PC data here at the end. I would very much like to be able to work according to my configuration again. The Windows energy-saving mode is set to off.
Gerätename DidisTurbo
Prozessor 12th Gen Intel(R) Core(TM) i7-12700KF 3.60 GHz
Installierter RAM 32,0 GB (31,8 GB verwendbar)
Geräte-ID C2B4ADDA-869D-40DF-B2CE-40F87E67FB5E
Produkt-ID 00330-80000-00000-AA179
Systemtyp 64-Bit-Betriebssystem, x64-basierter Prozessor
Stift- und Toucheingabe Unterstützung für Stifteingabe
Edition Windows 11 Pro
Version 23H2
Installiert am 02.01.2024
Betriebssystembuild 22635.3140
Leistung Windows Feature Experience Pack 1000.22686.1000.0
indexação é apagada
fbaiao@netfb.com.br
Auslogics BoostSpeed13
Thanks in advance - Scott
Proper Clean Up steps for Auslogics BoostSpeed13
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
Hacker
Hack keep coming after all 4 pc.s an will not stopan wriying code to stop all types of functions. Just look back over last few weeks an you will see what your product is deleting from my hard drives. Then you can address your way of dealing with this person.
a
hacker keeps repeatly
The version of AMD software is no compatible with your current installed AMD graphics driver.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Problem device RAID Controller
Problem Devices
RAID Controller, PCI\VEN_11AB&DEV_6440&SUBSYS_644011AB&REV_02\4&15442326&0&0008, Device drivers are not installed
I am using SSD drives in an old Lenovo C20 ThinkStation, designed to run servers, as a standard PC
Do I still need to enable RAID Controller in this device.
Should I disable it, or install the drivers as requested
Cubase and low DSP, ISR latency
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
Pc Speed is slow compared to other devices
Recently I have noticed that my PC internet speed has drastically gone down. Every other device in the house has speeds of around 65mb upload speed. Yet my PC is around 6mb
I have tried disconecting ethernet cable and just connecting to the wifi but thats just as slow. I have also tried doing a network reset and that did not work. Every interent page used to be instant and now it really lags. I cannot do any online work until this is fixed.
Can you give me a list of things to try I am using windows 10
Win 11 start-up
However start-up takes forever. wheel turns over 50 times
How to uninstall and reinstall Edge
Clearing Privacy History issues
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
auslogics driver updater causes WINDOWS 10 to be disabled
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Programa não esta fazendo scan
Does disappear language icon ?
tray icon
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Empty Folder Cleaner and Windows
aidez-moi à installer Windows11 à partir de Winsdows10
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,