1897 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Tab Crashes when go to Look at Report from Deep Disk Cleaner
After I run my Auslogics Boostspeed (makes a backup). I go to look at report and get error "Gah. your tab failed" What/Why does this happen? I don't know how to attach the report. Sorry (Old Lady)
Empty Folder Cleaner and Windows
Does the Empty Folders Cleaner differentiate which folders should and should not be deleted in the Windows OC? The tool identifies hundreds in my C drive, and I assume those in the Windows' System, Program Files, Windows32, etc. should NOT be deleted, but I can't tell.
Analyse pour ajustements Windows
Bonjour,
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
aidez-moi à installer Windows11 à partir de Winsdows10
Nom de l'appareil Asus-N732V
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
"Location servises managed by your organization"
I need to fix this. Want to be able locate my laptop in case it gets loss
HP Envy Desktop 23 No audio devices after windows 10 update
Hello,
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
About BoostSpeed
Sorry about the bogus Subcategory- apparently I cannot send without one but BoostSpeed is not listed.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
letters are very thin -hard to read
Dear Sir/Madam
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
sound in windows 11 alway from small to big when i play video
The sound in windows 11 alway from small to big when i play video, mp3, and on youtube also, evanthough when i pause for awhile and then I play it also happen the same problem. It disturb me a lot
Could you please help me. Thank you so much
Could you please help me. Thank you so much
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Fehlermeldung beim Start von Auslogics Disk Defrag Ultimate
Hallo,
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
auslogics boostspeed
i hava auslogics boostspeed 12 and i paied for the new version 13. i didn't get he new version. can you send me a link to download the ne version.
Can not print
Since I did the clean up on my computer I can not print. It is a network printer and the IP guy said the connection is good but something is blocking my computer from seeing the printer and communicating with it.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7