1859 questions
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
Content hidden to protect privacy
ERROR 80073712
WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
keep losing saved tabs
Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
graphics card
what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Content hidden to protect privacy
/ If the internet is cut off around the worldno sound, drivers not there
Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Bluetooth driver
When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
Background processes
I have the idea that background processes lower the framerates of my flight simulator, leading to stutters. When I examine the resource monitor, I see that about 200 background processes are running, even when totally none program is active. I cannot image why all those processes are neccessary. All those processes have names that doesn't give my any insight in what all those processes are doing. How can I find out which processes I can stop and which are mandatory?
Driver is Unavailable
My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
Errors 0x80070091 and 0x8007016a
Can the pro version of Auslagics find and repair the cause of errors 0x80070091 and 0x8007016a?
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
Unable to update Windows 11 to 22H2....
My computer has stopped being able to use Windows Update to install normal updates, including Windows 11 22H2. All software and drivers are up to date. I have late generation motherboard (Asus Rampage VI Extreme), intel CPU 10980XE, and nVidia 3090. I have followed multiple scripts from the internet to clean out the software update folder. Any ideas?
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
Richiesta di pulizia del browser web
Buonasera,
quando per "risolvere tutti gli elementi" la schermata mi chiede di chiudere tutte le applicazioni aperte, mi elenca n. 5 msedege.exe che non riesco a chiudere né manualmente né col pulsante "chiudi tutto". Utilizzando "Ignora", mi rimangono 214 tracce nel browser web ed il semaforo mi rimane rdi colore rosso.
Cosa posso fare?
Ringrazio anticipatamente per il disturbo.
bluetooth dissapeared from device manager after cleanup
Hi,
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
Long Boot time and black screen while booting
I have a ACER Nitro 5 laptop (windows 10 home original), mainly for entry level gaming. I am using laptop/desktop from last 12 years and I have moderate knoweldge on S/w issues, how to keep the laptop fast (by defragmenting, registry cleaning etc.). Recently I am facing Boot issues thats getting frustrating. Initially it started with long booting time, it was taking 7-10 minutes to reach to user account (Pin), and during that time the CPU and GPU fan speed was getting super fast (like during heavy usage).
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7