1899 questions

I am not getting full gigabit speed on only my computer.

Hello all, happy holidays!

Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.

I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point

1305 views
Dec 27, 2019 at 02:53 AM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1520 views
Dec 25, 2019 at 07:43 AM

cannot delete HKEY Acronis

Cannot install/activate Acronis s/w due to Registry problem

5107 views
Dec 24, 2019 at 05:54 PM

System Scan

When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?

1034 views
Dec 23, 2019 at 12:55 PM

Не получается запустить.

Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)

1547 views
Dec 22, 2019 at 10:39 PM

Windows upgrade

Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?

Regards
Petar

1415 views
Dec 19, 2019 at 08:58 AM

BSOD

I have new core i3 4130 with 500gb hard disk and 8 gb ram with all drivers updated but my windows crashes frequently I have scanned the whole pc no virus found then why is this happening?

1507 views
Dec 19, 2019 at 07:52 AM

slow computer.

hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri

1210 views
Dec 18, 2019 at 04:01 PM

Transfer of Auslogics boot-speed and main question about my current laptop situation

Greetings Aus Q,

Go ahead and ding me if this is perceived as more than one question.

Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.

Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.

A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?

B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?

C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?

D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.

Thank you,

Jim Copeland

Content hidden to protect privacy


1049 views
Dec 14, 2019 at 09:57 PM

Bluetooth not working

Bluetooth isi not working. Please suggest remedial measures to resolve the issue.

1822 views
Dec 14, 2019 at 03:30 AM

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?

1258 views
Dec 13, 2019 at 07:36 PM

Google Drive File Stream Stops Working

How do I prevent BoostSpeed from interfering with Google Drive File Stream? Each time I scan, I lose connection to the Google Drive File Stream and have to uninstall and re-install it.

1018 views
Dec 12, 2019 at 02:08 PM

Defragment

How to do offline defrag of system files

1385 views
Dec 12, 2019 at 06:23 AM

Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web

Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович

1152 views
Dec 10, 2019 at 03:49 PM

please solve driver problem

my computer show unknown device please solve driver problem

1092 views
Dec 10, 2019 at 02:05 PM

Minecraft

modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか?
いちおう、エラーログを添付しますので教えて下さい。お願いします。

1181 views
Dec 10, 2019 at 05:25 AM

File transfer software

I thought you guys offered a file-transfer system a while ago. Or am I mistaken?
I want to send a 300 MB video to a colleague, but could not find any reference in the main menu to do so.

1927 views
Dec 10, 2019 at 12:05 AM

Computer freezes up

One of the reasons I purchased Ausilogic is to help me with performance. My computer freezes up for 10 seconds or so every few minutes. I don't know if hardware is failing, if there is a miscatch among compenentry.
How can we use your products to solve it.
So far, I haven't been able to eleminate this problem

5283 views
Dec 09, 2019 at 03:58 PM

How can I keep my pc secure

When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.

1223 views
Dec 09, 2019 at 03:34 AM

Addressing a specific drive

Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.

My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.

By chance is this an Australian designed programme?

Sincerely


John Terry
680 views
Nov 14, 2022 at 11:50 AM

BoostSpeed always errors off

I installed 3 times and did 3 scans but each time it said:

Error EDrive not found Exception. Drive could not be found.

What can I do?
680 views
Feb 05, 2023 at 04:00 AM

Stopcode

Hi.
Windows crashes... I don't see any particular connection between the crashes except that I get this message...

windows.com/stopcode MEMORY_MANAGEMENT

any ideas? Thanks David

678 views
Feb 13, 2023 at 08:34 PM

адаптер

Почему не запускается и как обновить
678 views
Feb 14, 2023 at 10:24 AM

Latest update

Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
678 views
Nov 30, 2022 at 02:35 AM

проблема с компом

здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
678 views
Oct 18, 2022 at 06:30 PM

Auslogics Boost speed

I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me

Thank you

Bob Parr
677 views
Jan 28, 2023 at 10:50 PM

Löschen von Dateien

Hallo
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss

Antwort bitte in deutsch.
677 views
Dec 23, 2022 at 10:14 AM

USB

USB non détectée dans le gestionnaire de périphérique
675 views
Jan 15, 2023 at 06:21 PM

Ping

What are some efficient ways to lower ping when gaming on windows 10?
675 views
May 29, 2023 at 07:14 PM

printer does not print after running Auslogic

can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
675 views
Oct 20, 2022 at 12:38 PM

external hard drive recovery

so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund

P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
674 views
Feb 05, 2023 at 12:28 AM

Spinner GIF Keeps Spinning on Some Websites

Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.

Windows and the browsers are all up-to-date.

When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.

Any suggestions?
673 views
Feb 16, 2023 at 02:57 PM

メモリーを有効利用

CADソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。

BIOS findet SATA Festplatte nicht.

Wie finde ich Password für BIOS Einstellungen?
673 views
Aug 30, 2023 at 12:53 PM

Driver Issues

Hello Dear Sir, Madam,

We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64

I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.

As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?

It would mean the world to us!!

I have added a pic, of the properties of the card with it, using the program speccy

Thanks for the help!

Best Regards!

672 views
Feb 10, 2023 at 05:11 PM

Auligistics Boost Seem to Be Deleting Windows Files

Auligistics Boost Seem to Be Deleting Windows Files, For Example my Searchhost DLL got deleted, stopping aall my searches
672 views
Jun 09, 2023 at 10:03 AM

Smart Card Service

Hello!
I have encountered the problem with Smart Card Service turning off. And I am actually using a smart card. I keep opening Services menu in windows and turning it on again. (Auto/manual no matter) It works then, but the next day it will be the same issue over and over again.
I suspect that BoostSpeed is turning it off as a matter of "optimisation". Who can I check and make it stop? I need this service running.
Best Regards, Dmitry
671 views
Feb 19, 2023 at 08:21 PM

boost speed 13

When I do a scan, it comes back and tells me xxxx amount of junk to be cleaned and fragmented. When I click recolvder all, 90% of the junk is removed. I cleaned junk files and it said xxxx amount of files and it cleaned all but 91 mg. I therefore have to clean 2 or 3 times to remove all. WHY? I have paid for this version and it is not updated. Please advise.

Doug
669 views
Jan 13, 2023 at 11:06 PM