Taboptimizer is causing a 32 bit program to crash
How do I disable Taboptimizer in BoostSpeed 11. I have verified that is is a program in the BoostSpeed directory on the Windows 10 computer. If I do not run BoostSpeed, then I do not have the problem. I can send crash logs if that helps. I would rather just disable Taboptimizer or not use it.
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
Unable to to Receive Emails on Laptop and Desktop, etc
Since changing my password wuth my ISP and on Thunderbird, I am unable to receive emails on my Desktop, and now for some reason, I can n longer send them either. I also have problems with laptop, I can send but not receive emails.
Error message on Desktop: "An error occurred while sending mail, the mail server responded: SMTP.auth. Not alowed on Port 25"
For replies use:
Roger Hilton
Not Receiving Emails
I have tried by re-installig the software,but I find all the settings arestill there, whereas I used to have ti restore backups.
Roger Hilton
Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.
Hi there,
I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.
Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.
I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .
Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?
I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!
Kindly update me on a solution to this problem.
Many thanks,
Savio da Rocha Lobo,
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
Having to re-enter my Microsoft account info many times.....
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
windows search do not work
Kaspersky will not run
Following the registration of Boostspeed 11, when I try to run my Kaspersky Total Security scan it stops at 1% and will not scan any further. Is there a setting in the Boostspeed 11 that is causing this and what do I need to do to rectify this
Restricted volume on a new hard drive
Skype cannot sign in for several time
It's pretty offen when my Skype cannot login or I'm unable to make any calls or send messages. My connection is fine, Windows works pretty good. Is ther any way to understand wha't going on?
I want boost speed to startup when win 10 starts
I cannot get this boost speed 11 version to create a staru up buttom to check or uncheck. So, currently I must start my pc. Then start boost spped 11 and diminish to the lower tray daily. I would like to set it to Start each time my pc is turned on automatically.
I do get a failur when I try to set this auto run featur from the settings within boost speed 11. I seaprch online and cannot find an answer.
Installation of Logitech Options hang indefinitely
I just bought MX ANYWHERE 2S mouse. Logitech web page insists I must have the LOGITECH OPTIONS executable to parameter the mouse. So I tried to install, but the installation does not complete.
That's it for now.
i got few problems with nmy network can u help please
how are you
i need help please
i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them
thanks ^^
Foreign language for BootSpeed 11
Is there a french translation for BootSpeed 11 ?
If no, do you plan to translate it next?
With thanks for your answer.
cordially
Patrice Vivin
nettoyage Registre + defragmentation
J'ai lu qu'il ne fallait pas trop nettoyer le registre, on risque de perdre des données essentielles. J'ai lu également qu'il ne fallait pas dégragmenter le disque trop souvent, est-ce vrai ?
Auslogics Game Power Plan, Economy, Work power plans
I would like to disable these power plans as i use Win10's Ultimate Power Plan. I noticed that it automatically replaces my preferred plan after using Boostspeed scanner.
I am making this request bec i don't know what these power plans do and how they perform.
I am a Boostspeed 13 subscriber, details of my subscription are added below for your reference.
Thank you
Scanners ignore folders configured to skip in Preferences
My PC crawls after i installed
I have using AusLogic Bootspeed for over 6 mths (was on v 12.1.2 and now downlaoded v13
ever since i stalled and used your software My PC runs very very slow. In fact i think your software has drastically
affected my pc. what can be done to make it super fast like it was before installing
BoostSpeed13 更新インストール
現在 BoostSpeed_12 使用中です。 _13 アップデートの購入続きを完了しました。 手順書に従う中で "ヘルプ" のプルダウン内に "レジスト"記述が無く、バージョンアップできない。正確な手順書をお送りください。
Auslogics Boost Speed registration
El teclado de mi laptop no funciona
Compre la lic de BOOTSPEED y tambien la licencia de DRIVER UPDATER
Cuando actualizo los drivers ya no funciona ningun teclado
Esto ya me sucedio dos veces y esta es la tercera ocasion
Necesito me ayuden a resolverlo
Para redactar este correo estoy utilizando el teclado en pantalla
i moved folders and files
i moved folders and files from the C: TO EXTRA SELF MADE G: TO FREE SPACE AND from that time i cant open most of the files and am having a hard time i dont know what to do
Not Responding
Boost Speed doesn't recognize SSD
Boost Speed doesn't recognize SSD and claims that it is HDD. Yes, I am sure it is SSD, all other software recognizes it as SSD (programs like Speccy, etc.).
How can this be fixed?
Thanks.
John
Bluetooth não conecta após usar softwares Auslogics
Bricked my HP Evo Prod ID 669a1ua after driver update
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam