1859 questions
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
Content hidden to protect privacy
ERROR 80073712
WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
keep losing saved tabs
Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
graphics card
what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Content hidden to protect privacy
/ If the internet is cut off around the worldno sound, drivers not there
Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
cant update due to virtual box
hi
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
защита
при работе с функцией "защитить" выходит сообщение о сбое работы программы. Кнопка "защита" не устанавливается и не фиксируется на верхней строке .
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
computer shuts off
My computer unexpectandlty shuts off after 15 minutes. I check the cpu usage and its low. Not sure if the system is overheating.
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
How to setup RAID 1 on computer with MSI
I have a pair of brand new Samsung 990 Pro 2TB each NVME M.2 drives
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7