1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1440 views
Dec 25, 2019 at 07:43 AM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1438 views
Jul 07, 2020 at 04:16 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1435 views
May 12, 2020 at 08:28 AM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1434 views
May 23, 2020 at 09:39 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1432 views
May 06, 2020 at 04:31 PM

аааа

медленный

1431 views
Jun 28, 2020 at 10:18 AM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1431 views
Jan 03, 2021 at 09:19 PM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1430 views
Nov 19, 2020 at 11:45 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1429 views
Mar 28, 2020 at 01:49 PM

モニター画面が操作中に何回も、すぐ真っ暗になります。

本日より、スクリーンセーバーのセッティングと違う動きで画面が1分位で真っ暗になります。マウスを動かしたり、エンターキーを押すと元の画面に戻ります。
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。

因みに、電源操作も全て解除し、なしの状態にしております。

以上宜しくお願いします。

佐藤光則  hsny7743@uranus.dti.ne.jp
1429 views
Jun 24, 2021 at 07:08 AM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1428 views
Aug 17, 2020 at 09:27 AM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1427 views
Sep 01, 2019 at 05:05 PM

My wireless driver is not working

This is the second time this has happened and it has something to do with this softwarre Auslogics 11 after a deep scan took place. But now I cant restore the driver because it seems to be blocked,
The diagnostic's say "Windows can not bind the IP protocol stack to the network."
This is with my wireless adapter and not with my LAN, But I need my wireless adapter asap. Yes I have tried reinstalling the driver and it says the same thing,

1425 views
Apr 15, 2020 at 03:02 PM

Auslogics Driver Updater 1.23.0.2

Уже не первый раз встроенный антивирус Windows 10 "ругается" на программу, после чего удаляет DriverUpdaterHelper.dll, выдаёт код ошибки 0х0000007Е, и просит переустановить программу. А сейчас при попытке загрузки сетапа с вашего сайте пишет, что она содержит вредоносную программу. Пожалуйста, подскажите, как мне решить данную проблему, чтобы на будущее я с ней не сталкивался? Форма техподдержки непосредственно по вашим программам не работает ни через Мозиллу, ни через Хром, сообщения не отправляются, поэтому пишу здесь. Пожалуйста, сбросьте мой счётчик бесплатных вопросов.
1424 views
Apr 02, 2020 at 01:36 PM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1423 views
Oct 27, 2020 at 09:03 AM

Restore

Can I ask you a question of restoring an image?

1423 views
Jul 29, 2020 at 04:16 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1422 views
Apr 18, 2020 at 10:31 AM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1422 views
Nov 24, 2020 at 02:38 AM