1899 questions
Напортачил...
Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
Logitech C920s
I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
WIndows Security closes when opened
Hi I'm Raffy and a New member of the Auslogics
When I open Windows Security Application it closes immediately
how do I fix it
PROVING
How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
Microphones disabled
After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Word Document Files
Does your Duplicate File Finder work only on image, video, audio, archives and application files?
How to find duplicate Word document files, pdf files etc ?
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?
Lock-screeen blury
Hello!
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
Microsoft Edge and...
Win 10 problem: one update won't go through at all, Microsoft Edge opens a white page (personally) that I can't close normally, repair fails because the new install stops in the middle and never finishes. When Edge doesn't work, Outlook doesn't work, neither explorer, right-click on files doesn't work. Sometimes Edge works, but soon stops. I've tried everything, I don't know what to do. I don't use Edge, but apparently it blocks everything else for me.
внезапно стал плохой интернет
у меня был нормальный интернет всё было хорошо но на след день он просел до 100кб загрузка хотя на спидтесте он как был по 80мб так и остался и уже месяц он такой до сих пор а что делать я не знаю
PC not powering up
Hi,
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Connects but stil doesn't work
Using Windows 11 Pro for Workstations. This is the first and only time I have used this OS so I don't have any experience troubleshooting it or point of reference. I have multiple devices, headphones and other devices that I know work for Bluetooth conectively purposes but otherwise but when I attempt to use them on this laptop, Windows tells me that the devices are connecting to the Bluetooth device I have selected but I get no sound. The only thing I can tell you that stands out and is related is that it tells me under System/Bluetooth that the device is connected but when I go to System/Sound, the connected device will not show under Sound/Outbut Device even though it shows connected under Bluetooth. I have considered reloading the OS from scrath (factory reset etc.) but really don't want to go through all that. So I am asking if you have any ideas otherwise.
Screen Saver Retreval
After a through clening I seem to have lost the screen saver prompt. The program is there and working - but it does not turn on when directed. How do I rescue the code that seems to be lost?
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Не понимаю куда девается память
Как мне посмотреть последнии скачанные данные и понять что у меня занимает память? Я буквально скачал расширение на гугл и у меня пропало два гигабайта, как это работает (винодоус 10)
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
Change DNS
I am getting the message: 'Attempt to change DNS detected' Adapter: 'Wintun userspace tunnel #223'
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
the best way to free-up dwindling space on my diskdrive
My computer is slowing down more and more as I use up more diskdrive space. It is an older computer but has been super reliable until very recently. What is the most effective way to free-up hard drive space to allow Windows to be more efficient?
Festplattenbereinigung rückgängig machen
Hallo,
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
AUSLOGICS BOOT SPEED 12
Me gustaria saber si la version pro de este programa arregla los errores y archivos dañados del registro de windows 7 version 64 bits.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Espero su respuedta. aun estoy usando la version gratis de este programa.
Win 10. Жесткий диск С
Привет! У меня резко , за одну ночь, с дика С пропало 25 Г. Не знаю что делать? Где искать проблему? Как это можно устранить? Не подвергая свой старый ноут переустановки ОС . Windows 10 HOME 22H2 19045.3693 .
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7