1919 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
no se activa el icono en el administrador de dispositivos de window 10 para el bluetooth, por lo que no puedo emparejar ningun dispositivo de este tipo mediante bluetooth
My computer does not see any phones connected via USB
My computer does not see any phones connected via USB cable. I tried changing both phones and cables. The computer sees the component itself but cannot access it in the hard drive menu. I always give access to files on the phone and the phone itself charges normally
Edge permissions
I use Windows 11 and Edge is my default browser. I love Microsoft Edge but can't understand why every time I start my computer, Windows asks me twice to give permission for it to use Edge, and then later when I go to use Edge it asks me again.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
WinSXS via Auslogics Windows Slimmer 4.0.0.6
Hello,
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
Зависает программа
Здравствуйте уважаемые. Скажите пожалуйста, почему зависает программа Auslogics SSD Optimizer 2 когда начинается Обрезка, и что делать?
32-bit and 64-bit versions
Looking at the report from Revo Uninstaller of applications on my windows laptop running Windows 10, I can see most of them are the 64-bit version but quite a few of them (including Auslogics Boostspeed 13, Adobe Digital Editions 4.5, Kaspersky, Dropbox to name a few) are showing as the 32-bit version.
I believe if these were the 64-bit version they will run better and faster.
Is there anything I can do to convert them from 32-bit to 64-bit?
Please advise.
Thanks!
Chris
I believe if these were the 64-bit version they will run better and faster.
Is there anything I can do to convert them from 32-bit to 64-bit?
Please advise.
Thanks!
Chris
Delete all script typed into google search.
When I type something into incognito window,how do remove it so it can never appear again?
i cannot play sound in my headphone conected via bluetooth
can you please help me fix my sound. it doesnot work!
IMPOSSIBILE APRIRE, LEGGERE E APPLICARE IL FILE DI CUI SOPRA
Buona sera
Sono abbonato all'eccellente software JRIVER MEDIA CENTER (ANCHE SE MOLTO COMPLESSO E COMPLICATO).
A cominciare dagli aggiornamenti. Quando è disponibile una nuova versione (attualmente JRIVER33) ricevo un messaggio via e-mail con allegato dal titolo Media Center33 Master-605914.mjr
Ora questo maledetto file mjr non lo conosce e non lo riconosce nessun sito di aiuto all'utente.
Ho scritto vari messaggi al SERVIZIO DI ASSISTENZA di Media Center, negli USA, ma purtroppo la risposta è sempre la stessa: Il nostro sistema utilizza per maggiore protezione solo questo tipo di file mjr."
Ho visitato decine di siti nel web per trovarne almeno uno, in lingua italiana, che documentasse le procedure di installazione e aggiornamento del programma JRIVER. Nessun risultato.
Per questi motivi ho deciso di utilizzare la Vostra potente risorsa. Per risolvere questo piccolo-grande problema.
Ringrazio per l'attenzione e resto in attesa di decisivo riscontro.
Giancarlo Perani
Sono abbonato all'eccellente software JRIVER MEDIA CENTER (ANCHE SE MOLTO COMPLESSO E COMPLICATO).
A cominciare dagli aggiornamenti. Quando è disponibile una nuova versione (attualmente JRIVER33) ricevo un messaggio via e-mail con allegato dal titolo Media Center33 Master-605914.mjr
Ora questo maledetto file mjr non lo conosce e non lo riconosce nessun sito di aiuto all'utente.
Ho scritto vari messaggi al SERVIZIO DI ASSISTENZA di Media Center, negli USA, ma purtroppo la risposta è sempre la stessa: Il nostro sistema utilizza per maggiore protezione solo questo tipo di file mjr."
Ho visitato decine di siti nel web per trovarne almeno uno, in lingua italiana, che documentasse le procedure di installazione e aggiornamento del programma JRIVER. Nessun risultato.
Per questi motivi ho deciso di utilizzare la Vostra potente risorsa. Per risolvere questo piccolo-grande problema.
Ringrazio per l'attenzione e resto in attesa di decisivo riscontro.
Giancarlo Perani
Нерабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет",
Здравствуйте!
У меня ноутбук ASUS TUF Gaming F17
После установки Windows 11 были рабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет", который автоматически уменьшал яркость экрана для комфорта глаз.
1) Через некоторое время функция "Увеличить яркость" и "Уменьшить яркость" просто пропала и её нет в настройках как показано на скриншоте. Она была над функцией "Ночной свет".
2) Функция "Ночной свет" просто не работает, видно на скриншоте, что ползунок в режиме ON, а яркость экрана не меняется
В чём проблема и как вернуть эти функции в рабочее состояние?
Восстановление системы на момент установки Windows невозможно, т.к. нет точки восстановления на тот период.
У меня ноутбук ASUS TUF Gaming F17
После установки Windows 11 были рабочие функции "Увеличить яркость", "Уменьшить яркость" и "Ночной свет", который автоматически уменьшал яркость экрана для комфорта глаз.
1) Через некоторое время функция "Увеличить яркость" и "Уменьшить яркость" просто пропала и её нет в настройках как показано на скриншоте. Она была над функцией "Ночной свет".
2) Функция "Ночной свет" просто не работает, видно на скриншоте, что ползунок в режиме ON, а яркость экрана не меняется
В чём проблема и как вернуть эти функции в рабочее состояние?
Восстановление системы на момент установки Windows невозможно, т.к. нет точки восстановления на тот период.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7