Recording locks up.
Cursor locks up and I can't type
Auslogics BoostSpeed 13のアップデート
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
Windows Search getting turned off
Buster turns it off constantly, so I need to reset the setting again and again and again.
How do I stop Buster from turning off my Windows search setting?
Please advise.
Thank you.
Development of tools to repair this common issue
Any thoughts would be appreciated.
PS love the product.
No se oye el sonido
Hola. Llevo un par de meses en los que de golpe se corta la audicion de sonidos en mi ordenador (el testigo luminoso de mis altavoces desaparece como si éstos no tuviesen corriente eléctrica). También en la reproduccion musical. Normalmente el sonido desaparece (aunque visualmente - las lineas de volumen suben y bajan - y según información de configuración todo funciona correctamente) y vuelve a aparecer transcurridas unas horas. Estouy harto de desinstalar y volver a re-instalar el controlador. Hoy he ido un paso más allà reinstaurando sistema a un punto anterior en el tiempo. No se arregla. Aparentemente no es culpa del controlador. Todo apunta a que hay alguna aplicacion en mi ordenador que produce este efecto. O quizás esté demasiado saturado. En más de una ocasión se pierde el sonido justo después de un análisis efectuado por Auslogics BoostSpeed aunque este caso tampoco ocurre en el 100% de las veces que me quedo sin sonido. Cuando se va el sonido dura horas y cuando vuelve el sonido por sí mismo también recupera el sonido durante horas. ¿Pueden ayudarme a solucionar este molesto problema de una vez por todas?
Gracias
No se oye ningun sonido
установить андройд 13
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
boostspeed tray icon
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
DSN resolution failing
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
Deep disk cleaner
Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.
Cordialement
Laurent MESNIER
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
ERROR CODE 80072EFE WHILE UPDATING
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
If I have purchased Boost speed 12, Do I need the registry cleaner product also?
The Select full screen/ minimise button is no longer showing at the top right of the screen.
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
File and Printer Sharing
Win10
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
Missing subcategory
What is the correct subcategory for a software question for Auslogic products such as Boostspeed, Disk Defgrag, etc.? The "Ask a Question- New Question" screen will not allow a Subcategoty that is not on the drop down list.
rundll32
Trying to fix 'Enter your user name and password for th efollowing server' message - when I go into mail accounts and re-enter the password a rundll32 problem comes up. Should I run your software Auslogics Trouble shooter?
Thank you,
John.
Cat protection turns on every time i boot my Intel I7 Win 10 Machine
cat protetion goes on everytime I turn off my Intel I7 win 10 machine
I am locked out every time I boot, I reset it off see that it is saved but next time I log on its on again
DNS server
playing videos
The error message says:
(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss
Lori
Correct pagefile number for 4gb ram ddr2?
my specs:
windows 8.1 pro
amd phenom quadcore 9600 2.30 ghz
4gb ram ddr2
nvidia gt 710 2gb vram
i also have it set to minimum and maximum 6184 because its the currently alocated number in the bottom of the pagefile window
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Windows Startup
BoostSpeed
Hi,
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
Thanks,
Michel
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
Defragmenter related question
There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?