Senpre cheio
Obrigado.
Notices
Random ping spikes
The Wireless Network Adapter cuts out
What is messing with the WNA? No other device in my house using the wifi has this problem. Only my laptop I am using now.
Thanks...Shane Ostrom
Boost Speed
Please advise.
Slow startup
I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.
Patience and any help offered would be much appreciated!
Thanks & regards
Jacqueline Collier
Empty Folder Cleaner and Windows
Unable to update Windows 11 to 22H2....
Löschen von Dateien
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss
Antwort bitte in deutsch.
Пропал сигнал микрофона
fragmented files
logiciels parasites
d'autre part j'ai un une fenêtre d'information qui s'affiche de manière intempestive lorsque je suis connecté. Le logiciel qui a l'air de venir de windows, n'est pas supprimable
How to allow advertisement come through Dailymotion application and website, whilest blocking advertisement traffic on every other website and application?
If the advertisement is blocked, the service from dailymotion application and dailymotion.com website are not provided, due to their provisional condition of their service.
In short, how to undo the add block [advertisemnt bloc] feature from the Auslogic BoostSpeed 13?
unnessasary delay
2, Why it takes more than 4 hours to finished the Deep Disk Cleaner ?????
Rescue Center
wIE7WO finde ich das Rescue Center, für den Fall, dass ich die gelöscghten wiederholen möchte?
Windows 11, PC Sleeps when it shouldn't
'Power mode' set to 'Best performance' and
'When plugged in, put my device to sleep after' set to 'Never'.
Despite this, the PC goes to sleep after a few minutes of being idle, which in turn kills RDP sessions which I do not want to happen.
There must be other settings somewhere which are overriding the 'Never' setting. Please help me understand what they are and how to change them.
Thank you and best regards
Phil Parkin
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Pro Version
Re-enable the Windows key on the keyboard
Error 1605 and 1628
I am facing problem about error 1628 and 1605,can you help me to solve this problem?
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Internet Explorer re install
Bonjour !
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
Merci !
Sylvain
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する（チカチカ。。。正常）
１分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる（現在のように）
上記の状態が前触れもなく発生する
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
Windows Security - Account Protection
"Dynamic Lock is not working because Bluetooth is off."
I do not know what device to try to turn on to Bluetooth.
Thanks in anticipation.
Mike Kemp
Mobile:
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb