Добрый час. При запуске Windows запускается обработчик команд, и число всё увеличивается. Что следует с этим делать?
Помогите разобраться .
Спасибо

Is there a program or anything that will scan my laptop and honestly improve the speed and performance?

Windows does not see this file since I had BoostSpeed clean my coimputer.
dcu.centennial://toasthandler/Create/NewUpdatesReadyToApply

What should be done?

Task Manager on my Win 11 PC is showing CPU 29% busy (idling) whilst Auslogics view is showing 17%. Can you explain the difference?

Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.

I`ve recently done a deep scan with boost speed 13 which resulted in me losing all my download files from the users file. I`ve tried recovery several times using different restore points without any success. I ran advanced recovery software which tells me they have to be saved to another location. Selected drive D but still don`t see them. Is there any way i can recover my downloads with boost speed 13. ?

je ne sais pas si la question est déjà posée ou non, mais voilà ma question.

Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.

When windows released their XP version on windows there were a lot of Software Companies selling expensive softwares for Engineering tasks... To secure these advance softwares from thievies,,, they use USB HASP keys,,, that kept operational startups to a specific PC that had a USB ports to allow placement of one of these keys plug in dongles... Then Windows 7 came along and it was the start of half of my HASP starting to fail to work, while some donglescontinue to work... I believe it was the Pro version on Win 7 that had a Xp version attached to it that did help bridge my work a little... Then windows 8 was total failure... Windows 9 never say the day of light... Windows 10 showed up and was so buggy at first, mostly in their third party drivers areas, it was not worth the bother for years... Then Window 11 appeared and once again a solid Windows plateform became realized... But Win 11 has its limits! Now... All versions after Windows 7 failed to support totally all my expensive security keys on all these later versions... I also fully really this long ago and prepare what I would do, and this also included window 7 too... Because of this trouble, I maintain my primary computer running Windows 7 Pro and I also maintain a FAST Dual Xeon Xp computer too... Doing this all my expensive engineering software are still operational, even today... I also know the Hp also does this little trick too... I also complained long ago to Micrsoft many times on this subject, but they ignored me... And,,, I know a insider at Hp who confirmed this for me what I said Hp was doing secretly is true...

Q!uestion: Is there any Third Party solution softwares that can allow Xp era USB Dongle security keys to work on Window 11?

Opinion: I think the answer is NO... I look every once in a while to see on the Internet... But since you said I had a question open, I elected to ask you folks...

Comment: If I were to upgrade some of my Dongle licenses, (And,,, keep in mind that some companies went out of business long ago...) the cost would approach over a Half Million Dollars... They want me to purchase their newer version while my older versions work just fine on my Xp computer,,, when I need to run one of those programs... This is what I plan to do going forward, but if there was a way to run on Windows 11, I like to know how and where...

Comment: It is also been a good thing that many current computer software companies that maintain older versions of window fully understand why this is a good idea to contineue to do... I hope Auslogics does this too... I also put in a comment about your latest Driver software that when I tried it last fail to run on Windows 7 Pro... Not good! I am just pointing this out, because it needs to be pointed out...

warum fällt die tastatur bei einem notebook von captiva gekauft 01.01..2021 komplett aus diesess schreibe ich mit der bildschirmtastatur. neupreis: 1.459,- €

CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:

inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024

My good old Line 6 Toneport KB37, midi controller, and external soundcard combo stopped working on my new PC.

When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.

Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.

Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.

I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.

The same USB cable is being used on both PCs.

Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?

Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.

Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson

Is there an easy fix to get rid of an HDD 100% issue. Tried resetting RAM limits.

I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.

By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.

If I use duplicate file finder and click delete is the original also deleted?

Hi,

after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..

The new peocessor and motherboard are second hand ones..

We replaced CMOS battery but it did not solve the problem..

Any tips please?

Thank you

Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?

I get this message everytime Boostspeed runs:

There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.

Enabling TPM 2.0 on HP All In-One Model: 22-b020na

I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?

I did the four scans suggested under Maintenance and the File Explorer has stopped working. I've tried several fixes suggested on line, but nothing works. What to do?