Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
License
Dear All,
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.
Kind regards,
Danil
Displaying wrong color/crap in photos
Hello
After using boost speed I discover that my paintshop pro and canon software dont display photos properly.
As you can see in attached file it is totaly wrong and also on canon.
I have done a complete reinstallation af paintshop pro according to advice from corel and it didn help.
So boostspeed has done something, but I dont know where to restore from.
Please help.
Thanks
Regards,
Erik
Taboptimizer is causing a 32 bit program to crash
How do I disable Taboptimizer in BoostSpeed 11. I have verified that is is a program in the BoostSpeed directory on the Windows 10 computer. If I do not run BoostSpeed, then I do not have the problem. I can send crash logs if that helps. I would rather just disable Taboptimizer or not use it.
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Kaspersky will not run
Following the registration of Boostspeed 11, when I try to run my Kaspersky Total Security scan it stops at 1% and will not scan any further. Is there a setting in the Boostspeed 11 that is causing this and what do I need to do to rectify this
I want boost speed to startup when win 10 starts
I cannot get this boost speed 11 version to create a staru up buttom to check or uncheck. So, currently I must start my pc. Then start boost spped 11 and diminish to the lower tray daily. I would like to set it to Start each time my pc is turned on automatically.
I do get a failur when I try to set this auto run featur from the settings within boost speed 11. I seaprch online and cannot find an answer.
Foreign language for BootSpeed 11
Is there a french translation for BootSpeed 11 ?
If no, do you plan to translate it next?
With thanks for your answer.
cordially
Patrice Vivin
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Need license key
I upgraded from Boostspeed 10 Pro (license key: G2AEG-XXXXX-3WNYY-XXXXX-G79JL) to Boostspeed 11 Pro. However, I did not reveive a license key for version 11. I have attached a copy of the transaction. Can you help me with this? Thanks.
Not loading
Dashboard, one click scanner, clean up, etc.etc.etc not loading.
What needs to be done to do so?
logiciel trop lent et pas trés maniable
Re bonjour Auslogics Team,
Ne me trouvez pas trop insistant mais j'essaie par tous les moyens d'utiliser votre nouvelle version ABSP 11.
Il est trop lent,il bloque ma machine en permanence alors qu'avec le 10.24 et avant cà fonctionnait super.
Faites quelque chose dans cette direction.J'ai essaié de rajouter un ficher langue LNG français mais cà ne marche pas
avec votre nouvelle version.Pensez qu'il n'y a pas que seulement l'anglais dans le monde [L'australie est une ancienne
colonie anglaise] mais tout de même.
Salutation.r.t.
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
BoostSpeed PRO not activating
I purchased BoostSpeed PRO on 5 Jul (ord#
Support?
Hi! Is there a plan to support the Opera GX browser? I have been using this broswer for my web serching needs. It's pretty good. However, Auslogis BoostSpeed is not recognizing the browser as a supported browser. Thank you for taking the time to read this question.
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
Blue Screen
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
older auslogic boostspeed
dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work
dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,
проблемы с Auslogics BootSpeed 11
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Internet Optimization
Hello. i get free version of boostspeed and i see there is internet optimization that needs pro version and before i try to upgrade i want to ask what it is about, how dose this optimazies my internet? i have problems playing online games and i hear that windows 10 needs optimization for better gaming experience, dose this will help?
Некорректная работа со сторонним ПО
Здравствуйте.
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Система:
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
File Shredder
I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
Unwanted Auslogics Intrusion
I have the pro version of Boostspeed installed on my PC.
I have turned off everything I can in respect of notifications, maintenance, start with Windows etc ... however the programme will - intermitently start up with windows (unwanted) or will frequently start when another programme is in use, placing the 'dashboard' screen over the active programme.
Both scenarios are intensley annoying to the point where I am giving serious consideration to removing the programme altogether.
Your advice would be appreciated.
Incidentally, please ignore the Subcategory as Auslogics does not appear in the crop down menu and I cannot send the message without something being in this field?????
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
slow computer.
hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri
Не отображаются элементы сайтов
Здравствуйте.
После оптимизации Auslogic BoostSpeed 11 перестали отображаться в браузере на сайтах: подложки карт местности, он-лайн графики.
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?