Auslogics Shell Extensions and Startup
I recently looked into the Auslogics Startup Manager and Shell Extensions and I was alarmed to discover that 2 programs are listed as Dangerous. I have checked the web which lists these 2 program as 58% malicious. The programs relate to the Motherboard hardware installation. They are ASUS.com and atkexComSvc.exe. According to the various web sites the way to remove them is to go to Control Panel Programs and Features and to uninstall. But on my configuration they are not listed in the program list. Auslogics reports them as Dangerous. How do I use Auslogics to disable/remove/unistall?
Corel Paintshop Pro 2020
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride
Fix Windows update error code 0x80073712
How do I fix Windows Update error code 0x80073712 using your BoostSpeed 11 software on my Windows 10 Pro computer. Your article on fixing this error code said you could repair is problem with your BoostSpeed 11 program.
Thank You.
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Blocked URL's
Sir,
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard
Thank you so much for your support.
Alex Janssens (Iepenburger)
BoostSpeed Messages
I am not using the computer a lot, but BoostSpeed is regularly giving me messages to do scans or to defrag my SSD. How can I reduce the frequency of these messages?
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
猫モードについて
家族も本ソフトを持っておりますが、家族の環境ではメンテナンス画面で猫モードの表示がありません。
設定などによって猫モードが表示されないといった条件などがありますでしょうか。
Зависание прогаммы
Почему Auslogics BoostSpeed 11- 32 бита, когда будет для 64 битных windows 10?
Постоянно при запуске зависает намертво.
отключение не нужного
как в этой программе можно ли отключить все не нужно и что бы пк летатал пк нужен исключительно для игр и хотелось бы отключить все не нужное ну я не знаю половины тут не чего если можно подскажите что делать
h78
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Reklamation !
Wann hören Sie endlich auf mit Ihrer Reklame zu Bombardieren .Es ist sehr Làstig !!!! mit gruss M.Monnier
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?
Payment
When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.
The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.
Anyway, i hope you all have a nice day and take vare of yourselfe.
Mikael
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
integrator.exeの負荷が大きい
Auslogics BoostSpeedを最近アップデートして以来、integrator.exeのCPU負荷が30%になっていてファンが止まりません。このプロセスを止めたいのですがどうすればよいでしょうか?
Program opening
My subcategory would have been the Boostspeed program but wasn't listed so I chose any in order to get the question submitted.
I am using Version 12 of Boostspeed on a Windows 7 platform. My question is: Why does it take so lone for the program to open when double clicking the icon from the Desktop?
rescan
When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
猫モードについて
家族も本ソフトを持っておりますが、家族の環境ではメンテナンス画面で猫モードの表示がありません。
設定などによって猫モードが表示されないといった条件などがありますでしょうか。
The Select full screen/ minimise button is no longer showing at the top right of the screen.
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Corel Paintshop Pro 2020
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
совметимость
Здравствуйте.
Я не однократно обращался с вопросом блокировки вашей программы антивирусной программы DrWeb. Скажите что то решешается и есть ли решение? Спасибо за помощь. Владимир.
Boost Speed 12 running very hot
Not really settings. See below!
When running, Boost Speed 12 R 12.0.0.2 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?
Buddy Seigel
Deep disk cleaner
Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.
Cordialement
Laurent MESNIER
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned