Windows-related issues

I NEED YOUR HELP HOW CAN I DISABLE WINDOWS DEFENDER WINDOWS 10

So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam

I updated Windows 10 yesterday. Windows Security and Explorer freeze. When I run BoostSpeed13 ver.13.0.0.6, it freezes, but Windows Security and Explorer work normally without BoostSpeed13. Please tell me how to resolve.

Hallo,
warum geht bei obigem Prozess ständig meine CPU derartig in die Höhe, dass oft 40-50% davon verbrucht wird.
Sobald ich mehr als zwei Aktionen durchführen will, Internet und ein normales Programm, w.z.B. BoostSpeed,
dauert es ewig bis sich was tut.
Ich habe shon etliche Dinge mit dem Boost Speed eingestellt und verbessert, aber große Änderungen hab ich
bisher nicht feststellen können.

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry

Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

I use Windows 11 and Edge is my default browser. I love Microsoft Edge but can't understand why every time I start my computer, Windows asks me twice to give permission for it to use Edge, and then later when I go to use Edge it asks me again.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.

I have removed Microsoft edge and Cortana from my computer but on start up it shows in the Event Viewer that there is always 2 errors relating to searching for the Cortana package (Appx PackageSync). Just wondering if you know how I can stop my computer from looking for Cortana at all.

Regards
John

Медленно загружается, особенно Google. Что делать? Версия Windows 7 Home.

Hi,
From time to time I get a notification that "Windows Start up took 1m 40sec" or similar with the suggestion that I look at the start up programmes with, I presume, the idea of reducing that time.
I am all for doing just that, however, when I open the Start Up I am confonted with a list of apps which for the most part mean very little to me. I have no idea what disabling any particular app will do; whether it would have a detrimental or beneficial effect on my system.
I would be grateful for any advice or suggestions you may be able to give to help me.
I had thought to supply you with a list of the apps but can find no way to even copy a list into a word document, so maybe you could help me to accomplish that so that you will be better able to help me!
Alternatively, I am happy for you to use remote access.
Regards,
Donald Stewart

Hi I found your website on the promise that it would sort out the 8000ffff eroor? It hasn't, can it be sorted?

I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

Dear team,

Recently I was having problems with Microsoft Store that it kept giving an error message when updating apps (can't remember which one eaxctly). So I reset it as per advice on various forums but since then Microsoft Store has disappeared from Apps and no longer works at all!

Please help / advise.

Thanks,
Simon

ярлык на раб столе стал белый иеще проблема вы видите

Hi I'm Raffy and a New member of the Auslogics

When I open Windows Security Application it closes immediately

how do I fix it

Hi, I have AuslogicsBoostSpeed ​​11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex