943 questions
how to fix stop code kernel data inpage error
My computer have this problem very often can you help me, please. Thank you so much
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
despues de suspender, arranca con TEMP
Puse mi desktop en modo SUSPENDER. y ahora arranca con un perfil TEM, como soluciono??
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
Stopcode
Hi.
Windows crashes... I don't see any particular connection between the crashes except that I get this message...
windows.com/stopcode MEMORY_MANAGEMENT
any ideas? Thanks David
Windows crashes... I don't see any particular connection between the crashes except that I get this message...
windows.com/stopcode MEMORY_MANAGEMENT
any ideas? Thanks David
Annoying Windows Pop Up Notification
A few months ago, it started to show up an annoying Windows pop up message stating that my laptop (Lenovo, Windows 10) needs DirectPlay feature. I don't even know what is DirectPlay neither what is used for. The message displays two options: install or skip installation of DirectPlay. No matter what I choose it keeps showing up every time I turn on my laptop.
my question is: how can I get rid of this annoying pop up Windows notification?
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
I have on disk C: With 166 GB, the Windows 11 operating system and I just want the drive C: for Windows. In recent days it has been full and does not allow me to manage the available space, as it has free only 1.6 GB and honestly I do not know how to reduce files in C: which I find too risky because I can collapse the system. What was at risk of happening today. I ask: can you help me? Thanks
Manuel Araújo
Manuel Araújo
fichiers très très longs (240-250 caractères)
Solution pour les supprimer ils sont souvent dans USERS et/où windows 11
Moving the $HOME$ Folder to amother drive
1. I regularily reinstall my system and need to move the system directories to another location.
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
file explorer
since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
I tried to reset using a previous reset point but that did not work
Right mouse click or Double click slow respond
when I Right mouse click or Double click on a file it takes almost 90 second to 2 minutes to respond in window explorer
Why does boostspeed try to defragment SSDs?
Why at all? Especially when Diskeeper 18 from Condusiv is running? How can I disable just that portion of Boostspeed so it never interferes and puts unnecessary load on the SSD?
battery is not displayed in pannel
Dear sir,
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector
Storage issues
I recently sync my iphone to my laptop and i do like certain features but the problem i have is i get get a grasp on how to manage what goes where and the biggest issue is my onedrive and icloud storage is full and my google storage is getting there. i cant figure out how to stop the duplicate copies and 24 hour constant downloading.......
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Startup Applications Automatically Getting Disabled
Startup Applications Automatically Getting Disabled. They are enabled in the startup in Task Manager and then disabled when I restart the computer. How can I fix this?
G-HUB
Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
High system resource usage detected
To whom correspond: A few months ago I have been experiencing a slow response on my computer.
Every day I do a scanning and resolve of issues found through this tool, however still suffering this issue.
Is there something you can help. My computer is a LENOVO AIO 520-24AST.
AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2.70 GHz
Windows 10 Home, 21H2 VERSION
Hard disk with 1T storage (298 GB used , and 631 GB free)
I will be looking forward for your response.
Regards
Every day I do a scanning and resolve of issues found through this tool, however still suffering this issue.
Is there something you can help. My computer is a LENOVO AIO 520-24AST.
AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2.70 GHz
Windows 10 Home, 21H2 VERSION
Hard disk with 1T storage (298 GB used , and 631 GB free)
I will be looking forward for your response.
Regards
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
Question about conflict with avanced programs
Hi, i have installed in my notebook windows 10 home some avanced programs, my question is... if i install Auslogics Boostspeed 11, what configuration i need to make? I dont like to have problems with this avanced aplications
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
ファンクションが間違っています
Auslogics BoostSpeed 11 でクリーンアップ後(使っていないファイル/ホルダーを削除?)、PC立ち上げ時に以下のメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます(今のところトラブルは起こりません)が、何が起こっているのでしょうか?
どうすれば、このメッセージを消すことが出来るのでしょうか?
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます(今のところトラブルは起こりません)が、何が起こっているのでしょうか?
どうすれば、このメッセージを消すことが出来るのでしょうか?
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
windows 10 very slow
Hi,
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
My windows 10 always very busiy in 15-20 minutes almost every morning. I have install auslogic and it has make my workstation
far faster then. But after 2-3 weeks my workstation is back very slow / freeze and sometime s takes more than 30 minutes before it
can be used again
The disk activity always 100% in the morning for about 15-20 minutes . Have installed also the free version of AVG
Корзина
почему, после того, как ваша программа предлагает мне отчистить корзину, после сканирования и предложения исправить ошибки, корзина остается не очищенной? у меня возникает подозрение, что фактически ваша программа только создает видимость работы, а на самом деле ничего не делает!
Defrag Ultimate
I have Boostspeed 12.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same. I tried a lot of fixese but they all don't work.
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
no responcive pc
after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
boot speed
Dear Sir,
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
Regestry
Can I use the registry to solve.......How can I turn off "Do you want to allow this app to make changed to your computer" popup for one specific app?
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.