941 questions
Sleep Mode
I have Acer Aspire 5750 G laptop, pritty old one, with win10 latest. It works well but when it goes to sleep mode everything gets slow (all applications, movement of mouse, all system), I've been waited for a long time to give it a time to wake up but nothing. Only solutions is to restart it, and after that it is in normal working mode. Before latest win10 update (2004) it was OK.
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?
NON SI APRE PIU' IMPOSTAZIONI IN WINDOWS
DOPO AVER INSTALLATO AUTOLOGISTICS , IN WINDOWS NON MI SI APRONO PIU' LE IMPOSTAZIONI DI SISTEMA E WINDOWS UPDATE ... CHIEDO CORTESEMENTE UNA RISPOSTA .... GRAZIE 1000
タスクバーのタスクビューの表示
Auslogics BoostSpeed11でwindowsのたちあがりのスピードアップができるというのでやったのですが、その後、タスクバーのタスクビューをクリックしたところ、表示画面に「PCをもっと使用すると、ここにアクティビティが表示されます」と表示されるようになってしまいました。、以前には数日間のタスクが表示されていました。
元に戻す方法を教えてください。
元に戻す方法を教えてください。
Windows 10 Restart Stalls
I recently had to do a Windows re-install (repair technician did in shop) because of BSOD issue related to dell driver. I bought BoostSpeed 11 to try keep my PC in good operating condition and help with many of the Windows issues including fixing a restart problem. Since the re-install of windows, restart actually restarted just once. Now when try restart it just goes through the motions, on screen message says restarting windows and monitor goes dark (power is on) but restart does not happen. I wait 5 minutes and then press power button to shutdown. I repress power button to bring windows back on. Windows 10, using this method takes usually between 45 to 60 seconds.
If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
Device stops and freezes reqularly
My device is a very old one but still works properly, But these Days it starts To freeze reqularly and sometimes crashes, This only happened when i upgraded my laptop to windows 10, What should i do to prevent it
Intel bluetooth drivers
Hi there, im having issues with my bluetooth headset. Sounds choppy. Tried unintalling my bluetooth drivers but they cant be found?
Intallation original software error
please help I can't install the original Imindmap 11 ultimate software, the picture message is attached
Start up items
Sometimes I get a notification that a new item has been added to my start items, but the note gives no hint about what it is. Not very helpful.
Firewall problem
Hey!
I just switched my business to a new CRM system ( https://inperium.com/ ) and my firewall conflicts with it, how do I fix it and what is the problem?
I just switched my business to a new CRM system ( https://inperium.com/ ) and my firewall conflicts with it, how do I fix it and what is the problem?
Bluetooth Connectivity
Only getting partcial connectivity on both KOSS wirless speaker and headset.
Currently the headset is showing "Connected Voice".
If disconnected it will show "Driver Error".
Please advise.
Thank you.
Edge
How can I get rid of the edge browser starting up every time I click on Auslogics programs. I use google chrome and I will prefer that one in the future..?
system windows 8?
How do I change what system it shows? I have always had windows 10 on this computer.
Режим сна
Ноутбук периодически внезапно сам уходит в режим сна, хотя данную возможность я выключил. Происходит в любое время и в любой момент. Хоть в браузере сижу, хоть в игры играю. Резко гаснет экран и ноутбук оказывается в режиме сна из которого потом приходится выходить
Disable Edge Swipe in Win10 B2004 update
Hi Folks,
Thx much for your help on prior question!
Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.
F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.
Please tell me how to kill kill kill kill forever Win10 Edge Swipe.
Thx very much, Folks!
Scotty :-)
Thx much for your help on prior question!
Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.
F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.
Please tell me how to kill kill kill kill forever Win10 Edge Swipe.
Thx very much, Folks!
Scotty :-)
No me deja instalar programas pues este me devuelve una referencia
Lo que sucede es que anterior mente mi computador no le servia el programa Word y pues yo lo desintale y al intentar eliminar mis archivos para volver lo a instalar eliminar, quizas algunos archivos necesarios para Windows, pero el probrema llego en realidad, cuan al intentar instalar de nuevo el office,este se daño, y me dice que Windows ha devuelto una referencia, y asi con todos lo programas, e incluso me desactivo varia aplicaciones, es decir, este no deja instalar programas
Unused Applications - Application Logs
When doing an All Areas Scan the Disk Space never is 'Nothing Found' the result because the following files are always there:
C:\Windows\System32\SleepStudy\ScreenOn\ScreenOnPowerStudyTraceSession-2020 How can I delete, disable the folders of these files. I have gone in to the final files and deleted them, at least I think I have, but the early folders are still there and the Application Logs appear again. How do I get rid of or disable these folders? Thanks!
C:\Windows\System32\SleepStudy\ScreenOn\ScreenOnPowerStudyTraceSession-2020 How can I delete, disable the folders of these files. I have gone in to the final files and deleted them, at least I think I have, but the early folders are still there and the Application Logs appear again. How do I get rid of or disable these folders? Thanks!
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Festplattenbereinigung rückgängig machen
Hallo,
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Screen Saver Retreval
After a through clening I seem to have lost the screen saver prompt. The program is there and working - but it does not turn on when directed. How do I rescue the code that seems to be lost?
MAPPING USB PORTS TO COM PORTS
Im having trouble with not enough COM Ports for external, USB devices.
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
Privacy Monitoring
Does Auslogics have a feature to stop data broker sites from obtaining personal info?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
vignettes
Votre logiciels a apparemment affecté certains liens, car on ne voit plus les vignettes des photos dans les Fichiers.
Pour les voir il faut les ouvrir les photos dans leur lecteur.
Peut-on les récupérer?
J'ai déjà suivi les indications usuelles de Windows sans résultat.
Est-ce une coincidence?
Merci.
Pour les voir il faut les ouvrir les photos dans leur lecteur.
Peut-on les récupérer?
J'ai déjà suivi les indications usuelles de Windows sans résultat.
Est-ce une coincidence?
Merci.
my battery is working fine but it says its health is bad is that a problem?
So when i test my battery health it says that its health is terrible and reccomends me to change it while its working just fine should i change it or not?
Не понимаю куда девается память
Как мне посмотреть последнии скачанные данные и понять что у меня занимает память? Я буквально скачал расширение на гугл и у меня пропало два гигабайта, как это работает (винодоус 10)
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
Win 10. Жесткий диск С
Привет! У меня резко , за одну ночь, с дика С пропало 25 Г. Не знаю что делать? Где искать проблему? Как это можно устранить? Не подвергая свой старый ноут переустановки ОС . Windows 10 HOME 22H2 19045.3693 .
Set up your Computer
Each time I log in to Win 11 I am asked if I want to set up my computer.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
DirectPlay issue
Every since I installed Auslogics driver updater I keep getting a message that I need to install directplay. Directplay won't install on my computer and if I choose to skip the installation the attached notification constantly comes up. Is Auslogics driver updater or Bootspeed calling for this outdated windows feature. If I uninstall driver updater I don't get that notification.
What does this DOS/DSS commandline Window temporarily at bootup mean?
SInce installing Auslogics BoostSpeed, it hasn't been happening, but what does this mean?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7