Storage issues
Payment
When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.
The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.
Anyway, i hope you all have a nice day and take vare of yourselfe.
Mikael
changing language
Hello
I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .
greetings bottlecup
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
Chrome isn't in Volume Mixer, Windows 10
Any tips/suggestions to get the browser back to Volume mixer?
BoostSpeed
Hi,
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
Thanks,
Michel
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
License
Dear All,
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.
Kind regards,
Danil
Drive error alert but the scan shows nothing
In the menu that pops up when I hover the BoostSpeed icon in the system tray there is information that I have a drive error. I have run the standard disk scan but it doesn't show any errors on any of my drives.
Should I run a deep scan?
I have decided to bother you with this and not simply run the deep scan because I have had a number of situations with various computer equipment that could be descrived as "unlucky" and I am reluctant to do anything that isn't necesarry to my system.
Kind regards,
Konrad Wozniak
Displaying wrong color/crap in photos
Hello
After using boost speed I discover that my paintshop pro and canon software dont display photos properly.
As you can see in attached file it is totaly wrong and also on canon.
I have done a complete reinstallation af paintshop pro according to advice from corel and it didn help.
So boostspeed has done something, but I dont know where to restore from.
Please help.
Thanks
Regards,
Erik
Luminosity disappeared
Hello, i have problem, after install bootsped 11, i can't control luminosity because disappeared in central windows 10.
Best regards
Wireless not working
Hi,
I ran a cleanup of the system yesterday and it siad it would enter a new driver for me. I said OK and now the wireless is not working. I have reinstalled all files that I thought may contain the information to no avail. What can I do to rsolve this?
windows run slow
Time Lag with using both mouse and keyboard; Slow Computer
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Ron
Проблема с HDD диском
Orphaned Print Spooler Files
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
Windows Blickpunkt-Bilder
windowsの立ち上がり時間の表示設定
ソフトを起動しようとすると保護がかかってしまいます。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
System Booting
Bad block on SSD
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Memory management
Recently and very frecuent I got a problem with Windows 10. Blue screen error with mesage MEMORY MANAGEMENT issue. Then I must to turn oof the PC and reboot. Then from Power Shell, run "dism /online / cleanup-image / restorehealth". After several minutes the problem (¿?) is fixed, but after some time, this happend again and again. BootSpeed has any tool to check and fix this problem?
ファンクションが間違っています
無視して進めれば、通常の動作をしているように見えます(今のところトラブルは起こりません)が、何が起こっているのでしょうか?
どうすれば、このメッセージを消すことが出来るのでしょうか?
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
Майкрософт офис
Activate Pro Version
Bluescreen after using Driver Updater
Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.
What to do now?
Christoph
PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
Roaming Folder
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
Disk Defrag
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Committ Page Memory Use
Performace Issues
Recently, Whenever I reboot my system and run "scanner" I end up with 74 performance issues (file extension) like:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.asf\OpenWithList
Resolve supposedly corrects the problem, as with rescan, no issues remain. They reappear after reboot!
FYI, ccClean finds no registery issues.