1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Installation of Logitech Options hang indefinitely

I just bought MX ANYWHERE 2S mouse. Logitech web page insists I must have the LOGITECH OPTIONS executable to parameter the mouse. So I tried to install, but the installation does not complete.

That's it for now.

7769 views
Jul 26, 2019 at 07:34 AM

DVD-writer does not write music on CDs

My DVD-writer does not write audio files on CD when I try to create nusic CDs. The reverse is possible and it also plays dvds.
5917 views
Nov 13, 2019 at 01:42 AM

Need license key

I upgraded from Boostspeed 10 Pro (license key: G2AEG-XXXXX-3WNYY-XXXXX-G79JL) to Boostspeed 11 Pro. However, I did not reveive a license key for version 11. I have attached a copy of the transaction. Can you help me with this? Thanks.

5405 views
Jul 22, 2019 at 11:06 PM

Computer freezes up

One of the reasons I purchased Ausilogic is to help me with performance. My computer freezes up for 10 seconds or so every few minutes. I don't know if hardware is failing, if there is a miscatch among compenentry.
How can we use your products to solve it.
So far, I haven't been able to eleminate this problem

5153 views
Dec 09, 2019 at 03:58 PM

system

Hello. I have an asus notebook F3L. Windows 7 system. There will be no more new year updated. I do not know if I should install a new Windows 10? if the computer is old and how it will work

5116 views
Nov 28, 2019 at 10:34 AM

BoostSpeed PRO not activating

I purchased BoostSpeed PRO on 5 Jul (ord#

Content hidden to protect privacy
) for $29.95 as I was an existing BoostSpeed 10 customer. I cannot get the PRO version to activate. If I go to the Auslogics store and enter the new key that was provided with my purchase, I am told that I may either use the FREE version or purchase the PRO version for $59.95! I have already done this with my status as a current customer, which entitled me to the 50% discount. Why can't I get PRO to activate? There are features that won't work without the PRO version! I have a DELL XPS 8930 x64 computer with Windows 10 version 1903 installed.

5097 views
Jul 06, 2019 at 08:51 PM

Drive error alert but the scan shows nothing

Hello,

In the menu that pops up when I hover the BoostSpeed icon in the system tray there is information that I have a drive error. I have run the standard disk scan but it doesn't show any errors on any of my drives.
Should I run a deep scan?
I have decided to bother you with this and not simply run the deep scan because I have had a number of situations with various computer equipment that could be descrived as "unlucky" and I am reluctant to do anything that isn't necesarry to my system.

Kind regards,

Konrad Wozniak
5087 views
Sep 17, 2019 at 03:09 PM

Will not update to 11.2.03.03

Auslogics BoostSpeed 11.2.03.01 Can Not update to 11.2.03.03 Please help!

5083 views
Nov 25, 2019 at 11:42 PM

Unknown Software Running

Hi - I see this widget on my desktop all the time and I am not sure what it is. Trying to Google it said it was part of Chrome but I uninstalled Chrome and its still there - I'd really like to remove it, it's annoying and seems to provide no useful function. Picture attached.

5071 views
Oct 26, 2019 at 05:36 PM

CANNOT FIND SYSTEM RESTORE

My System Restore program seems to be gone.When i press System Restore in the Control Panel it thinks my computer is Windows &.It's Windows 10.How do i make a restore point?

5036 views
Dec 27, 2019 at 12:32 PM

Error message

I have tried several times to update Windows 10 Home but continue to receive error message Ox80073712 .Can you help?

5021 views
Nov 19, 2019 at 01:58 PM

Displaying wrong color/crap in photos

Hello
After using boost speed I discover that my paintshop pro and canon software dont display photos properly.
As you can see in attached file it is totaly wrong and also on canon.
I have done a complete reinstallation af paintshop pro according to advice from corel and it didn help.
So boostspeed has done something, but I dont know where to restore from.
Please help.
Thanks

Regards,
Erik

4988 views
Sep 16, 2019 at 05:49 PM

cannot delete HKEY Acronis

Cannot install/activate Acronis s/w due to Registry problem

4972 views
Dec 24, 2019 at 05:54 PM

windows search do not work

after using your softver , I lost windows search ;( . On my PC , on windows search table , word are not displayed . I try everithing from the google and you tube , but stil not work . Please help me to resolve this problem , I use this functiont every day
4948 views
Aug 15, 2019 at 06:46 PM

update from 11.2.0.1

11/25/2019 Sorry to11.2.0.3 update!

Content hidden to protect privacy

4944 views
Nov 25, 2019 at 11:50 PM

speed

Auslogics BoostSpeed 11 - I get messages saying that a high resource consumption has been detected. You may encounter extreme PC slowdowns.Tell me what to do?

4890 views
Nov 28, 2019 at 04:29 PM

Not Receiving Emails

I am no longer able to receive emails but can send them, I have heard that there could be corruption in the system, can you help with this issue?
I have tried by re-installig the software,but I find all the settings arestill there, whereas I used to have ti restore backups.

Roger Hilton
4889 views
Sep 03, 2019 at 11:18 PM

Skype

I can't receive or send Skype calls on my computer. It's probably my settings. Advice, please!

4870 views
Aug 06, 2019 at 05:29 PM

error 400

Have been getting error 400 messages lately, like a lot! Mostly I can just highlight the text in the sedarch box, press enter again and I get where I am going but this isn't right. Help!
Thanks!
Rob Green
4863 views
Jul 24, 2019 at 12:56 PM

speed

Here is a screenshot of the page, how to solve the problem?

4827 views
Dec 02, 2019 at 07:21 PM