Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Windows Update Failed
2020-03 Cumulative Update for Windows 10 Version 1909 for x64-based Systems (KB4541335) - Error 0x800f081f
How to solve this problem?
Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1.
Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1. При "активации_соединения" телевизор "говорит", что не находит ЭТО_УСТРОЙСТВО = называемое "ноутбуком" = то-есть = DESKTOP-G71D1L .
Bateria
Luminosity disappeared
Hello, i have problem, after install bootsped 11, i can't control luminosity because disappeared in central windows 10.
Best regards
Temperature
I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?
Sound just stopped again
I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?
Auslogics Anti-Malware!
bonjour je voudrais savoir si je peut installez Auslogics Anti-Malware alors que j'ai deja installez Kaspersky Security cloud est qu'il y a des risque de conflit avec les deux logiciel!
disk
New for this past week: upon boot up, before opening, screen gives me option of "checking disk" before start up. If I choose not to, I'm to press any keyboard letter within 8 seconds. When I reject option by pressing letter, message disappears and computer opens normally. I've done all the disk checks and cleaning multiple times.
What's this all about?
Thanks, Mark
Переключение предложение
Edge
How can I get rid of the edge browser starting up every time I click on Auslogics programs. I use google chrome and I will prefer that one in the future..?
Blocked URL's
Sir,
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard
Thank you so much for your support.
Alex Janssens (Iepenburger)
Microphone not working
What happened?
And, more importantly, how do I fix it?
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Defender not working
My Windows Defender is disabled, greyed out in the windows features window; I can't start it back up and when I try to open it, I get an error message saying I need a new app to open windows defender. Why isn't my Windows Defender opening up or working at all?
Im having troubles with DPC watchdog violation
software is slow
Hi
How do I increase memory resources to a particular progam/software using auslogics
Virus ID'd as trojan in the deepscan exec
It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb