1242 questions
Translate

Defrag and optomize problems

I have problems with defrag and optomize - it takes hours to complete the process. My previous version did not have that problem. It is so bad that i use windows defrag instead of Your defrag --- any ideas as to why???
167 views
Mar 30, 2022 at 12:47 PM
Translate

Bluescreen after using Driver Updater

Hi there,

Just installed my Driver Updater on my new PC and after updating the drivers and a required restart I get a Bluescreen with the message "Inacessible Boot Device" adn restarting does not help, nor does turning the desktop off and on again.

What to do now?

Christoph

PS: The "Device" above is probably incorrect as I'm writing this from my laptop.
202 views
Mar 29, 2022 at 12:19 AM
Translate

Good Day

Hi,i have a question i would like to ask about my pc about movie or video streaming because everytime when i watch something on my laptop it pauses itself without me pausing it and i would like to know how it happens and a possible solution.
129 views
Mar 28, 2022 at 07:58 PM
Translate

защита

при работе с функцией "защитить" выходит сообщение о сбое работы программы. Кнопка "защита" не устанавливается и не фиксируется на верхней строке .
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
161 views
Mar 28, 2022 at 04:01 PM
Translate

サウンドドラィバーの変更方法

 Win 10 Pro のUPDATEの問題でWin10に問題が発生し、マイクロソフトからクリーンインストールを進められ、実行いたしましたが、サウンドドライバーがHigh Definition Audio Device が入ってしまい、音声が小さく、DVDを見ても、音声が聞こえない状態です。 ドライバーを入れ替えたいですが、方法が 解らないです、教えて欲しいです
Translate

ファンクションが間違っています

Auslogics BoostSpeed 11 でクリーンアップ後(使っていないファイル/ホルダーを削除?)、PC立ち上げ時に以下のメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます(今のところトラブルは起こりません)が、何が起こっているのでしょうか?
どうすれば、このメッセージを消すことが出来るのでしょうか?

C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。

ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
204 views
Mar 28, 2022 at 12:43 AM
Translate

Ram Optimization

How do I enable the Ram Optimization fuction on Boost Speed 12?
174 views
Mar 26, 2022 at 05:34 PM
Translate

usb.デバイスドライバ-

USBと無線機をつないでます
マイク..スピーカーのドライバー(オ-ディオ)サウンド
認識してくれません
とエラ-メッセージ.が出ます.

よい知恵を貸して下さい.
167 views
Mar 26, 2022 at 09:57 AM
Translate

Fn клавиша на ноутбуке

Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
167 views
Mar 26, 2022 at 02:35 AM
Translate

product key

Sorry I have two questions in one I'm considering buying the software but when I run my multiplexity after rebooting it is asking for my product key I have to enter my product key every time I want to run it I need to work around for that



also Malwarebytes does not allow me in some inches to run the program
259 views
Mar 26, 2022 at 01:17 AM
Translate

PC se inhibe

cuando utilizo Zoom u otra aplicacion de comunicación
185 views
Mar 25, 2022 at 03:43 AM
Translate

problems with google and passwords

since I'm install Aulogics and run the program it keeps deleting my programs password and when I try to oprn (IN GOOGLE) facebook I'm getting unresponsive pages....but if I open facebook with EDGE I have no problems.....can you help?
allen iglicki
180 views
Mar 23, 2022 at 02:11 PM
Translate

disk has errors message

after using auslogics it says disk has errors . CAN THIS BE FIXED WITH AUSLOGICS
200 views
Mar 22, 2022 at 01:21 AM
Translate

Bluetooth devices can't connect

After running a scan and following several actions/suggestions, my bluetooth audio devices cannot connect to my bluetooth. I'm unsure what to do. I've tried removing the devices, and reconnecting them, but there's still a disconnect. My PC is able to discover the device, but it fails to connect. I've tried this with multiple devices. My bluetooth mouse still connects, but no audio bluetooth connection will work. I even tried to uninstall one device from my device manager, and of course now I can't even find it at all. Thanks for the help!
180 views
Mar 21, 2022 at 04:25 PM
Translate

Auslogics BoostSpeed 13

When (date) should we expect BoostSpeed to become available?
476 views
Mar 20, 2022 at 04:54 PM
Translate

optimize put topaz studio into reccle bin

recycle bin is getting ful ans auslogics wants to empty it. How to I get topas=z back
164 views
Mar 19, 2022 at 05:32 PM
Translate

Browsers run slooooow with WIN 11

Ever since I installed WIN11 the broswers (I've tried both Edge and Chrome) run at glacial speed, taking a second or two to respond to a mouse click. Sometimes a scan with Boost Speed seems to fix the problem sometimes now. Sometimes it disappears after a period of time, only to reappear after the computer has been asleep. I've tried all the fixes I've found online (remove extensions, etc.) and like the Boost Speed scan, the fix is only temporary if it works at all. Any advice?
195 views
Mar 18, 2022 at 05:56 PM
Translate

Missing files, Cannot restart

Restart hangs, so window will not update
168 views
Mar 17, 2022 at 06:25 PM
Translate

Question to Boost Speed

What is the difference between "Shredder" and "Delete"?
180 views
Mar 17, 2022 at 10:53 AM
Translate

BNP detected fatal error

I am having blue screen issues. BNP detected fatal error occurs every time I restart but not on shutdown.
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow

206 views
Mar 15, 2022 at 05:14 PM
Translate

Зависание прогаммы

Почему Auslogics BoostSpeed 11- 32 бита, когда будет для 64 битных windows 10?
Постоянно при запуске зависает намертво.

661 views
Jul 17, 2020 at 05:56 PM
Translate

Windows 10 Disc Optimizer

I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.

661 views
May 20, 2020 at 02:09 PM
Translate

How to fix (delete) dead shortcuts?

After fixing of whole system {using default settings) I still see dead links to apps or files which have been moved or deleted while ago.

Ho to fix/delete dead shortcuts/links?

Thanks

660 views
Mar 22, 2021 at 03:45 PM
Translate

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

659 views
Mar 28, 2020 at 01:49 PM
Translate

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

659 views
Apr 20, 2020 at 08:19 AM
Translate

viewing bottom of page.

Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.

659 views
Feb 11, 2020 at 12:54 PM
Translate

I am having catastrophic failure 0x8000ffff and error 0x0000022

I changed my account type from administrator to standard and i couldnt access most of my subscritions like Microsoft packages

658 views
Sep 22, 2020 at 09:33 PM
Translate

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
658 views
Mar 25, 2021 at 01:02 PM
Translate

Система пишет , что принтер не подключен

Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?
658 views
May 18, 2020 at 02:51 PM
Translate

selezione cartelle

Salve, vorrei sapere se nella versione registrata si ha la possibilità di selezionare le cartelle riguardo alla ricerca di duplicati o altro ?
cosa che invece non mi è stata possibile nella versione di prova del vostro "AUSLOGIC BOOTSSOEEDE11-
UTILIZZO windows 7
Grazie Massimo

657 views
May 11, 2020 at 10:14 AM
Translate

Luminosity disappeared

Hello, i have problem, after install bootsped 11, i can't control luminosity because disappeared in central windows 10.
Best regards

654 views
Sep 14, 2019 at 01:16 PM
Translate

How To

How do I sync Microsoft Edge and BoostSpeed?

652 views
Sep 26, 2020 at 10:31 PM
Translate

ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается как раньше.

Здравствуйте!

Ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается так как раньше.
Ноутбук был приобретен новым и я единственный владец. Раньше всё было в порядке. Установка вашего ПО и запуск всех инструментов пока ничего не дал. Я не могу понять в чём причина?
Ваш софт и фирменный софт Dell сообщает что АКБ находится в отличном состоянии. Сама Windows 7 pro показывает что АКБ подключена к З/У, но сообщает что АКБ не заряжается. АКБ не заряжается даже при полном выключении или перезагрузке ноутбука.
Как решение я вижу возможность также перепрошить BIOS. Пожалуйста, помогите решить вопрос.
Спасибо!

С уважением,
Николай
652 views
Apr 15, 2020 at 07:08 AM
Translate

NVIDIA 제어판이 안 켜져요

NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?

651 views
Jun 28, 2020 at 03:19 AM
Translate

Restore

Can I ask you a question of restoring an image?

651 views
Jul 29, 2020 at 04:16 PM
Translate

Проблема со спящим режимом

Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...

651 views
Jan 30, 2020 at 03:31 PM
Translate

Microsoft services malfunctioning

The Microsoft services are not working properly and some of it's features like EPIC GAMES and MICROSOFT STORE are not working. Can you help me solve that issue on my computer?
:D

651 views
May 16, 2020 at 02:21 AM
Translate

updating software

i get a message on my laptop for a new verion of boostspeed 11 pro. when i click lon the link and try to update, i get a purchase screen.
so, how do i update without repurchasing the software

650 views
Mar 23, 2020 at 06:09 PM
Translate

Pro Version

Considering the trial version does the job of speeding up my computer, what is the cost of the Pro Version?
650 views
Dec 22, 2020 at 02:05 AM
Translate

RDP keeps disabling on every machine that has boostspeed installed

I have my own domain with a virtual environment as well as several physical endpoints (mostly laptops). None of the virtual machines have boostpseed installed, only the majority of the physical machines. I have RDP enabled by group policy.

I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.

After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.

I found this post
https://qa.auslogics.com/question/225

And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
650 views
Oct 26, 2020 at 01:20 PM