1897 questions

Настройка RDP

Windows Server 2016. Как настроить удаленный доступ к этому серверу через RDP? Все где надо включено, а доступа нет. Выдает ошибку "Произошла внутренняя ошибка". Причем к другому серверу с Windows Server 2016 доступ есть.

1739 views
Feb 11, 2020 at 06:22 PM

Auslogics Configuration of Windows old version

I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.

Fernando Salmeron

1356 views
Feb 11, 2020 at 05:48 PM

viewing bottom of page.

Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.

1380 views
Feb 11, 2020 at 12:54 PM

Richiesta di un consiglio

Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.

Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11

domanda: BoostSpeed 11 include già anche Driver Updater ?

... non vorrei acquistare programmi uguali ...

Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?

Grazie e un cordiale saluto.

1378 views
Feb 11, 2020 at 10:46 AM

Error in install new version

Error in install new version

1356 views
Feb 10, 2020 at 04:55 AM

старая программа на дисе (с) 64 битная называется 7 максисальная

как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)

1455 views
Feb 10, 2020 at 02:40 AM

Microsoft Visial C++

Hi

I keep getting a message pop up (see attatched)

I have no idea what I have done to cause it to pop up, I also have no idea how to cure it. I have the latest DirectX and as far as I know everything else is up-to-date including Windows.
Most of the time I just hide the message because if I cancel it, it pops back up. However it is now preventing me from launching Unreal Engine so I cannot ignore it any longer I need to sort it out.

Please priovide your answer in simple terms as although I am computer savvy I am no master under the bonnet,programming etc.

1675 views
Feb 09, 2020 at 03:47 PM

bootspeed 5

I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz

1199 views
Feb 09, 2020 at 01:43 AM

Offline Defragmentation

Is it possible to do offline defragmentation of system files using BoostSpeed 11

1720 views
Feb 07, 2020 at 12:13 AM

my internal speakers are not working anymore

Hi, After purchasing and downloading auslogics boostspeed, driver update, defragmenter and anti-malware, my windows 10 laptops interal speakers are no longer working or even being detected by my computer. I have no idea how to fix this to get them re-enabled. Please help!!

1831 views
Feb 03, 2020 at 04:25 PM

Sound just stopped again

I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?

1484 views
Feb 01, 2020 at 11:26 PM

Cannot install new version of Pro v11.xxx

Whenever I get the message "a new version 11.~ is available, the download completes but will not install.
Check snip pic attached.

1420 views
Feb 01, 2020 at 05:27 PM

Double Clicking

Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?

1329 views
Jan 31, 2020 at 02:56 PM

used auslogics freeupdater tool after that was given message please wait while updating.

I have premium I used the auslogics free updater to download updates and dnow my computer is bootlooping it dosent even get to the windows screen what can I do I have all sorts of problems with your software please adise what I can do pc boots then turns off boots then turns of or tries to boot,this was fater I updated a driver that I was told was out of date by your system.

1579 views
Jan 31, 2020 at 02:27 AM

Проблема со спящим режимом

Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...

1450 views
Jan 30, 2020 at 03:31 PM

Медленно рабоатет ноутбук

Windows 10 на ноутбуке стал медленне работать. Программы долго открываются и в самих программах операции выполняются дольше. Как можно решить проблему, а потом поддерживать компьютер в рабочем состоянии?

1344 views
Jan 29, 2020 at 05:21 PM

Не работает микрофон

Добрый день.
После очистки и оптимизации компьютера с помощью Auslogics BoostSpeed перестал работать микрофон - и встроенный, и в любых наушниках. Система его видит, во всех настройках разрешено его использование, но на звук никак не реагирует.
На всякий случай прикладываю скрин менеджера программы - в заблокированных файлах есть куча файлов, связанных с драйвером звуковой карты Conexant, после исключения их из списка блокировки все равно не работает. Все это время звук в наушниках и без них есть.

1847 views
Jan 28, 2020 at 06:29 AM

Система

При долгой работе Виндовс 10 начинается полная загрузка Оперативной памяти!! Что сказывается на производительности компьютера!
1289 views
Jan 24, 2020 at 09:15 PM

Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1.

Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1. При "активации_соединения" телевизор "говорит", что не находит ЭТО_УСТРОЙСТВО = называемое "ноутбуком" = то-есть = DESKTOP-G71D1L .

1491 views
Jan 23, 2020 at 02:01 PM

Why I am seriously upset

Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes

That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name

2328 views
Jan 22, 2020 at 12:13 AM

Intel bluetooth drivers

Hi there, im having issues with my bluetooth headset. Sounds choppy. Tried unintalling my bluetooth drivers but they cant be found?

1478 views
Aug 06, 2020 at 11:12 PM

Virus ID'd as trojan in the deepscan exec

It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!

1477 views
Mar 12, 2020 at 06:03 PM

disk defrag integrated into boostspeed 11.5

I have both the boostspeed 11.5 and the defrag ultimate
Question:
It seems like the integrated defrag in boostspeed 11.5 is the old version not the new ultimate

What would be the advantage of getting the ultimate version if it is not integrated - what does the integrated version NOT do that the ultimate version does?

1476 views
Jun 17, 2020 at 06:05 PM

ssd external defrag

I have an external drive, SSD, attached to my computer thorugh usb3.
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?

Thank you
1476 views
Sep 21, 2020 at 01:37 AM

empty folder cleaner

Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive

1472 views
Oct 05, 2021 at 12:00 PM

software is slow

Hi

How do I increase memory resources to a particular progam/software using auslogics

1472 views
Feb 27, 2020 at 05:50 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1470 views
Apr 16, 2020 at 08:42 AM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1470 views
Apr 29, 2020 at 10:41 PM

Csnnot access new PC from other PCs on LAN

I have a private home LAN with three Windows 10 PCs that are sharing files & folders among themselves with no problem - I just click their PC name under Network in File Explorer. Problem is, I just set up a new Win 10 PC but when I click on that new PC's name under Network in File Explorer on any of the existing three PCs I get an error msg saying I don't have permission to access the new PC.

I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.

This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.

There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.

Am I missing a setting, or something else? Thanks for any help.
1469 views
Dec 08, 2020 at 01:58 AM

PC Crashing/Freezing

To Whom It May Concern,

In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.

When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.

The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:

https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data

Any advice, recommendations or support you an afford me would be very much appreciated.

I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.

Kind regards to you and your colleagues at Auslogics

Ian

Ian Willsher
1467 views
Nov 03, 2020 at 11:11 PM

Cannot get my computer to read SD cards

I've used your device driver updater and still cannot get my computer to recognize an SD disk.

1463 views
Jun 25, 2020 at 09:54 PM

Regular luz de la pantalla

Quiero saber porque con windows 10 no puedo regular la intensidad de luz de la pantalla. Quiero aumentar o disminuir su intensidad de brillo y no puedo.

1461 views
Nov 27, 2019 at 11:03 PM

Система пишет , что принтер не подключен

Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?
1461 views
May 18, 2020 at 02:51 PM

windows 7

I can't install windows 7 SP1

1459 views
Jun 06, 2020 at 08:38 AM

неисправность воспроизведения через блютус

музыка через блютус стала подклинивать

1459 views
Jun 20, 2020 at 05:15 PM

BoostSpeed 12 clobbers Voice Recognition.

I am running Windows 10 Build 19042-2009 BoostSpeed 12 Pro. I use Microsofts Voice Recognition with Language Microsoft Speech Recognizer 8.0 for Windows (English - US). When I installed BoostSpeed and run the scan and resolve. It clobbers Voice Recognition. I get this error message after. "Speech recognition could not start because the language configuration is not supported.The recognizer language must match the language of the user interface." Checking the configuration shows that the language configuration is still what it was before it stopped working.

I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.

Thank you
1459 views
Dec 26, 2020 at 01:58 AM

administrator blocked auslogics

I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.



Kind Regards,

Michael Figueroa
1459 views
Jan 19, 2022 at 10:17 PM

Re-enable the Windows key on the keyboard

How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
1457 views
Nov 14, 2022 at 05:14 PM

Disable Edge Swipe in Win10 B2004 update

Hi Folks,
Thx much for your help on prior question!

Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.

F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.

Please tell me how to kill kill kill kill forever Win10 Edge Swipe.

Thx very much, Folks!
Scotty :-)
1456 views
Jul 23, 2020 at 11:45 AM

старая программа на дисе (с) 64 битная называется 7 максисальная

как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)

1455 views
Feb 10, 2020 at 02:40 AM