Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
not fixed
Logging in to dashboard
How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?
Не работает Скайп и Outlook после установки новой версии
Если раньше после установки новой версии переставал работать скайп, то сейчас и Outlook перестал работать....
Скайп не делает звонки
А Outlook не грузится вообще....
А вроде бы раньше неплохая программа была....
DWM.exe
warum geht bei obigem Prozess ständig meine CPU derartig in die Höhe, dass oft 40-50% davon verbrucht wird.
Sobald ich mehr als zwei Aktionen durchführen will, Internet und ein normales Programm, w.z.B. BoostSpeed,
dauert es ewig bis sich was tut.
Ich habe shon etliche Dinge mit dem Boost Speed eingestellt und verbessert, aber große Änderungen hab ich
bisher nicht feststellen können.
fed up with lack of space on C Drive...what am I doing wrong?
I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry
battery not charging
my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.
Wireless not working
Hi,
I ran a cleanup of the system yesterday and it siad it would enter a new driver for me. I said OK and now the wireless is not working. I have reinstalled all files that I thought may contain the information to no avail. What can I do to rsolve this?
help needed
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
respectful.TOOFAN
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
Duplicated Folder
My name is Eric Borges and I am having an issue that when I update my windows 10 it's duplicating the windows folder in my C:, (follow attached). I've try to delete in many ways and even tho with the Auslogics app is not working, it's saying that the folder is deleted, but it's not. Is there any way to remove it permanently?
Best.
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Video issues
I can be happily working along, and if I need to see a video file, I can... but then, sometimes it stops, and I cannot make the video work again.
I have Driver Updater, but if I reboot the computer, the video function will work again.
Sometimes, if I run a BoostSpeed scan, the video might work again. It can still stop again, but if I Boost Speed again, it may not make the video run again.
So I have to reboot again instead, which is pretty time consuming.
My initial thought is I'm missing video drivers, but i have Driver Updater.
Can you advise and help me?
Error 1605 and 1628
I am facing problem about error 1628 and 1605,can you help me to solve this problem?
Demande Information
Bonjour,
Comment faire pour Rechercher des fichiers doublons sur un Réseau NAS
Avec mes remerciements
Courtoisement
Jacques LOGEAY
Internet Explorer re install
Bonjour !
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
Merci !
Sylvain
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
Pro Version
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb