720 questions
Translate

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1 view
22 hours ago
Translate

Auslogic Disk Defrag Programs NOT WORKING.

I have been using DiskDefrag for TEN years to successfully defrag my C: drive.

Starting last month Disk Defrag is not defraging my disk. I purchased the newer Disk Defrag 10 version and it performs exactly the same way.

Each time it runs it reportes processing a few dozen files and states Defragmentation complete, while the visual representation of the disk hardly changes at all - that is almost ALL the Red squares remain on the diagram.

Below is the image of my disk status after running DiskDefrag 20+ time; each time it reports "Defragmentation Complete"

Please contact me with a solution.

Content hidden to protect privacy

19 views
Apr 12, 2021 at 09:42 PM
Translate

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

14 views
Apr 12, 2021 at 02:40 PM
Translate

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

9 views
Apr 11, 2021 at 03:29 AM
Translate

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
12 views
Apr 10, 2021 at 08:00 PM
Translate

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
10 views
Apr 10, 2021 at 05:05 AM
Translate

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

10 views
Apr 09, 2021 at 04:28 PM
Translate

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
14 views
Apr 08, 2021 at 07:05 PM
Translate

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

51 views
Apr 08, 2021 at 01:17 AM
Translate

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
44 views
Apr 07, 2021 at 05:09 PM
Translate

activacion Pro

Por favor quiero actualizar mi version a Pro

55 views
Apr 03, 2021 at 10:27 AM
Translate

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
49 views
Apr 02, 2021 at 06:15 PM
Translate

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
54 views
Apr 02, 2021 at 03:28 PM
Translate

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
58 views
Apr 01, 2021 at 02:28 PM
Translate

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli
93 views
Mar 29, 2021 at 02:21 AM
Translate

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

78 views
Mar 28, 2021 at 11:08 AM
Translate

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

86 views
Mar 27, 2021 at 09:53 PM
Translate

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
96 views
Mar 26, 2021 at 10:52 PM
Translate

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
130 views
Mar 25, 2021 at 07:30 PM
Translate

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
118 views
Mar 25, 2021 at 01:02 PM
Translate

MSFS

Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous

235 views
Nov 19, 2020 at 10:31 AM
Translate

Security Center in Vista

I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?

234 views
Jun 06, 2020 at 09:43 PM
Translate

Eliminate Devices to be scanned by the software.

When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.

234 views
Jun 12, 2020 at 02:27 PM
Translate

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

234 views
Apr 27, 2020 at 08:32 AM
Translate

Sleep Mode

I have Acer Aspire 5750 G laptop, pritty old one, with win10 latest. It works well but when it goes to sleep mode everything gets slow (all applications, movement of mouse, all system), I've been waited for a long time to give it a time to wake up but nothing. Only solutions is to restart it, and after that it is in normal working mode. Before latest win10 update (2004) it was OK.
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?
233 views
Aug 22, 2020 at 04:22 PM
Translate

Formula not working correctly

when formulating a two page expression, the first page is not reading the second expression. I have given you the two formulas - I would hopefully like to have this sorted; if possible.

the first one should denote the year: In this case 2020

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

The second shouldgive me the first day of the year:

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

Question, is this even possible?

232 views
Oct 01, 2020 at 01:28 AM
Translate

Start Up Error

Every time I start up my laptop I get an Error Message:

RunDLL

There was a problem starting xrWCbgnd.dll

The specified module could not be found.

232 views
May 11, 2020 at 06:03 PM
Translate

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

232 views
May 12, 2020 at 08:28 AM
Translate

проблемы с Auslogics BootSpeed 11

Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?

231 views
Jun 15, 2020 at 04:08 PM
Translate

password / login recovery to all auto filled sites

sites my broswer automatically logs me in; its not now since I used Auslogics BoostSpeed 11. I need my logins to work when I vists the sites.
231 views
Sep 27, 2020 at 05:58 AM
Translate

DPI

What is normal DPI

231 views
Oct 25, 2019 at 04:25 PM
Translate

Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.

1. Почему программа начала дефрагментировать компъютер с диском SSD, хорошо ли это (вроде ему нужна только оптимизация), и если нет, как отключить дефрагментацию SSD ?

2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).

Заранее спасибо.
231 views
Jan 25, 2021 at 11:48 AM
Translate

wont install new drivers

cant install nvidia gforce and driver booster wont update my drivers ie: game drivers for windows

230 views
Jun 14, 2020 at 05:08 PM
Translate

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

229 views
Nov 19, 2020 at 11:45 AM
Translate

Registry Cleaner ==> Auslogic versus CCleaner

Hello from Italy,
before I founf Auslogic I used Ccleaner a lot to keep my PC in shape. Right now I still observe a diffrence between Ccleaner and Auslogic Registry Cleaner when it come to the type and number of issues the two programs do find in the Windows Registry.

Did you ever check this out and do you understand the reason why this is the case. To a lay person the Registry can or be wrong or right configured ... or is this the part where programming has it's gray zone ?

Cheers, Michael

Content hidden to protect privacy

229 views
Nov 07, 2019 at 04:06 AM
Translate

Cant Access app

I can access everything on my computer except for a application and winrar after updating my windows.


It shows Windos cannot access the specified device, path or file. You may not have the appropiate permissiong to access the item. I reformated my pc and its the same.

228 views
Jun 15, 2020 at 10:42 PM
Translate

Can't install update

On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.

228 views
Oct 28, 2019 at 01:45 PM
Translate

Paired but won't connect

I've tried everything to get my Sony bluetooth headphones to connect automatically, it is paired in "Devices" but when I switch the headphones on they wont connect, I have to go into Settings - Devices and physically connect by pressing the connect tab, I've tried going into "Services" then scrolling down to "Bluetooth Support Service", stopping it then restarting it, it just won't restart properly, the green "curtain" only goes about 15% accross before stopping i.e it has'nt restarted properely, any ideas!!!!
227 views
Jul 14, 2020 at 11:04 AM
Translate

problem after running resolve all issues early this morning

All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
226 views
Jul 26, 2020 at 10:15 PM
Translate

Режим сна

Ноутбук периодически внезапно сам уходит в режим сна, хотя данную возможность я выключил. Происходит в любое время и в любой момент. Хоть в браузере сижу, хоть в игры играю. Резко гаснет экран и ноутбук оказывается в режиме сна из которого потом приходится выходить
225 views
Jul 30, 2020 at 10:34 AM