After Auslogics did some repairs, alot doesnt work
I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do
Запуск Виндовс
Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
Отвалился BlueTooth
Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Disco duro se encuentra al 100%
Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?
POST interruption
What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".
Press continue or press del to load bios setup.
Why auslogics boostspeed can't solve this ?
Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud
Temperature
I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Windows 10 logon password via Auslogics
Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager
Повышенное потребление ресурсов
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
Кэш второго уровня
Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.
System Restore
Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem
help needed
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
respectful.TOOFAN
Windows 10 Restart Stalls
If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
Cannot use keyboard Up and Down arrows in Windows Clipboard History since today.
Earlier i selected the copied contents using arrow keys and used Enter key to enter the data, Now its not working, i need to use mouse every single time.
Пропали значки из трея
wont install new drivers
cant install nvidia gforce and driver booster wont update my drivers ie: game drivers for windows
game crash
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Problem with VPN
Blank Windows Security Window
Suggestions wecome. My understanding is that Defender is operating but not lettting me see that it is operating. I wish I could be sure of that.
Suggestion / Idea
This is not a question for you, merely an idea for additional software functionality. I think it could be a great feature.
I sometimes look at Event Logs for my Windows 10 PC, usually filtering out 'Information' type logs.
There are often events there that are errors. Sometimes these errors are happening thousands of times a day, but they happen silently and do not appear to impact my day to day work. But they must be hurting performance.
But if there was an 'Analyse Event Log Results' feature in BoostSpeed, which provided helpful feedback to users about those errors and suggested ways of resolving them, I would definitely use it.
I bet it would not be easy though!
Best regards
Phil
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Недавние
Как сделать так, чтобы сохранялись последние книги в Файл/Последние? Происходит автоматическая очитска и ничего не остаётся.
Каждый день всё пусто.
Super slow opening of files and folders
For the last week I am having issues opening any file or folder. It seems like it takes a minute or 2 for them to open. It is driving me nuts.
I have tried most of the items in https://windowsreport.com/file-explorer-slow-windows-10/ with no effect.
Anything you may provide would be appreciated!
Thank you
Robert
Failed Windows Updates
(2019-10 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517389) - Error 0x80070002)
My system is a Lenovo Think Centre w/I5 Processor.(M91)
Windows Settings
I can't access my Windows Settings. When I try to access it the page shows and then goes away. Can your software fix this issue?
Brightness not working proper0lly
its been a while my brightness doesnt work at the 2 and 3 level i will experience this issue every time when i sign in with a microsoft account doesnt matter what windows laptop it is in every laptop when i sign in with microsoft the brightness doesnt works on 2 and 3 level
plz help
tnx
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Microsoft Store no longer works or appears under apps!
Recently I was having problems with Microsoft Store that it kept giving an error message when updating apps (can't remember which one eaxctly). So I reset it as per advice on various forums but since then Microsoft Store has disappeared from Apps and no longer works at all!
Please help / advise.
Thanks,
Simon