Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Can you help?
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.