Spinner GIF Keeps Spinning on Some Websites
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
Stopcode
Windows crashes... I don't see any particular connection between the crashes except that I get this message...
windows.com/stopcode MEMORY_MANAGEMENT
any ideas? Thanks David
printer malfuntion after running Boostspeed 13
Driver Issues
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
Файлы родителей
wrong core amount
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
BoostSpeed always errors off
Error EDrive not found Exception. Drive could not be found.
What can I do?
external hard drive recovery
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Annoying Windows Pop Up Notification
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
Manuel Araújo
RAM is getting full most of the time
I have an 8GB RAM and getting full most of the time.
Is there a way or app that can auto optimize my RAM?
Looking forward to your reply.
Many thanks!
Regards,
Mark
auslogics boostspeed
fichiers très très longs (240-250 caractères)
Memory problems & Upgrade question
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
Moving the $HOME$ Folder to amother drive
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
Thumbnail files disappear
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
Windows Settings
I can't access my Windows Settings. When I try to access it the page shows and then goes away. Can your software fix this issue?
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
Flash drives
All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?
Malware install failure error
see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.
Windows 11 beta
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
Режим сна
Formula not working correctly
when formulating a two page expression, the first page is not reading the second expression. I have given you the two formulas - I would hopefully like to have this sorted; if possible.
the first one should denote the year: In this case 2020
=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))
The second shouldgive me the first day of the year:
=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))
Question, is this even possible?
Failed Windows Updates
(2019-10 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517389) - Error 0x80070002)
My system is a Lenovo Think Centre w/I5 Processor.(M91)
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Printer not connecting
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!
Unable to Send / Receive emails
Since installing your software I am now unable to receive email via MS Outlook -
free space
im trying to get this game called genshin impact, however it says i need more space despite the fact that i deleted everything that came to mind whether it would be pictures or games, i even tried to uninstall things from settings
i need help, apparently theres nothing else i can delete but i know for sure there is another way
POST interruption
What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".
Press continue or press del to load bios setup.
Система
Regarding default setting problem
I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly