Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
Application Name: Ddfs32_400.exe
Application Version: 0.0.0.0
Application Timestamp: 602cd97f
Hang Signature: eff9
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1031
Additional Hang Signature 1: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 2: 4777
Additional Hang Signature 3: 477790f40c8afa87ecb7402697914cec
Additional Hang Signature 4: eff9
Additional Hang Signature 5: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 6: 4777
Additional Hang Signature 7: 477790f40c8afa87ecb7402697914cec
Wo steckt der Fehler? - Was soll ich überprüfen?
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
since updates to win 10 my laptop no longer has functioning shift keys. i have checked sticky keys etc are all off. i have deleted driver for keyboard, restarted laptop to reinstall driver. i have been to laptop compies website and can find no driver updates for my model. acer 771555z.
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
Generally, copy and paste do not work with mouse druppin a meny. Now, I have to use tne keyboar,Control "c" to copy and control.'V' to paste. this has slowed my ompute use condiderably.
somtimes I can see a quick flas of the menu, but it disppears befoe any action can take place.
Any help to correct this would be appreciate. Thank You
После очистки и оптимизации компьютера с помощью Auslogics BoostSpeed перестал работать микрофон - и встроенный, и в любых наушниках. Система его видит, во всех настройках разрешено его использование, но на звук никак не реагирует.
На всякий случай прикладываю скрин менеджера программы - в заблокированных файлах есть куча файлов, связанных с драйвером звуковой карты Conexant, после исключения их из списка блокировки все равно не работает. Все это время звук в наушниках и без них есть.
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.