1777 questions

Driver is Unavailable

My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
367 views
Sep 16, 2023 at 12:58 PM

G-HUB

Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
366 views
Sep 16, 2023 at 12:24 PM

Actualizaciónes

¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
322 views
Sep 15, 2023 at 06:57 PM

Bricked my HP Evo Prod ID 669a1ua after driver update

So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
251 views
Sep 13, 2023 at 08:52 PM

low speed of windows

Hi
the speed of my windows is low
what can i do for this
287 views
Sep 11, 2023 at 02:42 PM

message

high system resourxce notification--change settings.What do i do to rectify thuis matter?
291 views
Sep 10, 2023 at 12:59 PM

ドライバーアップデーター

ドライバーアップデーターがファイイヤーウオールの設定を確認してくださいと表示されます
253 views
Sep 10, 2023 at 12:11 AM

usage

not good working
304 views
Sep 09, 2023 at 06:23 AM

Windows Update

Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
274 views
Sep 09, 2023 at 02:19 AM

DRIVER UPDATER REFUSES TO CONNECT

Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
483 views
Sep 07, 2023 at 07:29 PM

heute kein Zugang zum Abruf der Treiber-Daten

Gibt es ein technisches Problem beim Zugang zum Datenserver?
240 views
Sep 07, 2023 at 02:18 PM

windows search

não consigo usar a janela de activar ou desativar funções do windows
238 views
Sep 06, 2023 at 11:26 PM

Mots de passe

Bonjour,

BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?

Cordialement
Denis Schmitt
275 views
Sep 06, 2023 at 05:34 PM

USB

I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
259 views
Sep 06, 2023 at 05:11 PM

Luz noturna

A luz noturna deixou de funcionar, não posso mudar para a cor mais suave
246 views
Sep 04, 2023 at 05:13 PM

Anti-virus

Bonjour !!

J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.

Dois-je craindre la même chose avec CCLEANER ?

Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...

Cordialement,

Eric
249 views
Sep 02, 2023 at 07:49 AM

Velocidad de la computadora

¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
288 views
Sep 01, 2023 at 08:33 PM

Trial

Hey huge fan and long time user of the free edition and was wondering can i get a week trial please as im thinking of buying ? My PC is still running crappy


Thanks in Advance
301 views
Sep 01, 2023 at 08:04 PM

Fehlermeldung

Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:

failed download failure

was verhindert die Aktuallisierung bei dem Programm.

Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro

mfg Klaus Schwabe
275 views
Aug 31, 2023 at 10:32 PM

Problème fonctionnement Bluetooth

Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
293 views
Aug 31, 2023 at 10:07 AM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
984 views
Mar 25, 2021 at 07:30 PM

Regarding default setting problem

I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly

982 views
Jun 16, 2020 at 03:55 AM

iphoneの件

iphoneのバックアップを取る為、itunesにてバックアップを取るが。本商品でクリーンアップするとバックアップが消えてしまう為、バックアップ情報が消えない設定は教えて欲しい。

981 views
Nov 13, 2020 at 05:57 AM

error code 46362C1-0B211304-00000A09

This error code has been stopping me from opening numerous files. I cannot find any solution to it on MS error code site.
It has been driving me crazy for months now.
46362C1-0B211304-00000A09
Thanks,
Jim
978 views
Oct 27, 2021 at 07:38 PM

Want the operating system files checked and to be fully operational.

Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.


Thanks, L8R

Content hidden to protect privacy

978 views
Oct 17, 2019 at 08:07 AM

Unable to uninstall application using Uninstall Manager of Boostspeed 11

I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).

I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?

977 views
Jul 22, 2020 at 02:23 PM

Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web

Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович

976 views
Dec 10, 2019 at 03:49 PM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
974 views
Apr 13, 2021 at 09:26 PM

Sounds like a quiet popping when playing music offline or online.

Also videos like youtube or anything will glitch for a second at random for no reason. I have factory reset this PC and have not fixed it yet. I don't know if it's windows 10 or this new PC but it is quite annoying My old PC that I gave away never had this problem, but it was also windows 7. Also I don't know the device or subcategory, but I had to put something :|
973 views
Sep 02, 2020 at 09:21 AM

Stop code issues

Dear Sir or Madame,

My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.

Please help.

Thanking you in advance,

Coach Rod
973 views
Nov 16, 2019 at 07:27 PM

key product W10PRO missed

Hi, I have AuslogicsBoostSpeed ​​11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex

973 views
Oct 25, 2020 at 05:01 PM

Сброс настроек входа в систему Windows

Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.

973 views
Aug 09, 2021 at 03:41 PM

Eliminate Devices to be scanned by the software.

When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.

972 views
Jun 12, 2020 at 02:27 PM

takes 7 hours to defrag 18 files on a portable HD

Why is it taking 8 hours to only defrag 18 files on an "easystore" 5TB portable HD. 790 files on this HD is said to be fragmented. at this speed, it will take me months to defrag this HD. can I speed up the defrag speed?

972 views
Dec 29, 2020 at 11:45 AM

windows product

windows product ID for win 10 Pro is erroneous number as reported in system information

971 views
Jul 18, 2019 at 01:47 AM

registry cleaner

tried to use it but received message it has to be reinstalled. I need instuctions how to install.

971 views
Nov 04, 2019 at 08:25 PM

Windows Update Error

How do I fix error - 0x800700c1
970 views
Jan 05, 2021 at 12:14 AM

Keyboard issues.

I've just updated to windows 10 May update, have now completely lost functionality of shift keys.

970 views
Oct 23, 2019 at 01:22 PM

Old Windows Versions

When I do a Scan and Resolve, the scan always turns up the Windows "Tweak" of removing "Old Windows Versions." However, this appears to never get done, becaause I get the same option every time I run a Scan.

Why isn't it removing "Old Windows Versions?"
969 views
Jan 13, 2022 at 12:04 AM

problem after running resolve all issues early this morning

All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
969 views
Jul 26, 2020 at 10:15 PM