display settings/function
Не запускается Aslogics BoostSpeed
Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.
MSFS
Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous
Upgrading Windows Vista to 10
rescan
When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder
Видеокарта
Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.
Problema con servidor de internet y administrador de dispositivos
(0x8024a105)
A Game Application
Protect Doesn't Recognise MS Edge
It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.
BoostSpeed 11 still doesn't appear to recognise Microsoft Edge
Запретить windows кэшировать в mapping file
Используя RAMMap.exe выявил что те 10гб были схаваны Mapped File: standby. Почистил. но сейчас опять память утекает..
как можно отключить это недоразумение?
Служба SuperFetch отключена. Что еще может жрать память и не отдавать её?
Siempre se sobrecalienta el cpu al 100%
Intermittent PC Crashes/Freezes
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
battery not charging
my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.
playing videos
The error message says:
(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss
Lori
Не очищается корзина
Не могу очистить корзину,требуется разрешение администратора компьютера,кроме меня больше нет пользователей на этом компьютере !
Восстановить файлы не получается,очистить нельзя,вырезать тоже,проверял компьютер на вирусы и делал проверку дисков,всё хорошо
Что делать,как очистить корзину ? Меня это очень раздражает !
Windwos 10 x64
problem after running resolve all issues early this morning
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Thumbnail files disappear
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
pc unplugged ac adapter pc shuts down with battery charged at high percentage
Keyboard issues.
I've just updated to windows 10 May update, have now completely lost functionality of shift keys.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
registry cleaner
tried to use it but received message it has to be reinstalled. I need instuctions how to install.
Window.old folder
The PC had Update to 2004 Versione, now has the PC ond big 30GB Windows.old folder. why can i the folder delete
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
windows product
windows product ID for win 10 Pro is erroneous number as reported in system information