1859 questions

display settings/function

My 'brightness control' slider dissapeared in Windows 10 and I can't figure out a way to get it back. Now the screen just stays fairly bright all the time. There also isn't one in the notifications tab that I could us instead of the missing one on the desktop.
910 views
Nov 23, 2020 at 02:01 PM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1430 views
Nov 19, 2020 at 11:45 AM

MSFS

Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous

2015 views
Nov 19, 2020 at 10:31 AM

код12

Добрий.Подскажите што мне делать в такой ситуации?

1072 views
Nov 18, 2020 at 05:12 PM

Upgrading Windows Vista to 10

I have an old Vista laptop and it's pretty slow. Can I upgrade it to Windows 10? Can I use BoostSpeed on Vista?
1069 views
Nov 18, 2020 at 03:42 PM

rescan

When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder

985 views
Nov 16, 2020 at 04:48 PM

ONEdrive freezing PC

How to improve onedrive velocity?
1416 views
Nov 15, 2020 at 04:59 PM

Видеокарта

Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.

1086 views
Nov 14, 2020 at 04:29 PM

Problema con servidor de internet y administrador de dispositivos

Whenever I restart my pc, it does not want to connect to the internet, it appears connected but does not open internet pages, and the error solver says, it fails in the router dns, but it is not that, because in other devices it works fine, I must restart the internet modem or take out the ethernet cable until the line comes back, my service provider came and checked with his laptop, it works fine, they told me there is a problem on my pc. To connect the ethernet cable I use a HUB (photos) because my laptop does not have a direct connection to ethernet, and for some time, when I installed AUSLOGICS BOOTSPEED, I did some programming and it gave me an error in the device driver desktop, I don't know if that is doing something on my pc, I don't like to be connecting and disconnecting the ethernet cable, because it is supposed to work, no need to reboot or remove the cable. Since I installed AUSLOGICS BOOTSPEED, I HAVE GOT SEVERAL BUGS IN MY PC, I DON'T KNOW IF THEY CAN HELP ME TO SOLVE IT. I already tried everything.
1519 views
Nov 13, 2020 at 07:22 PM

(0x8024a105)

Computor will not up date because it keeps saying something missing (0x8024a105) thats what is missing what is it?
1095 views
Nov 13, 2020 at 06:15 AM

iphoneの件

iphoneのバックアップを取る為、itunesにてバックアップを取るが。本商品でクリーンアップするとバックアップが消えてしまう為、バックアップ情報が消えない設定は教えて欲しい。

1180 views
Nov 13, 2020 at 05:57 AM

A Game Application

I keep getting an error code that says 0xC0000005 (0x0) N whenever i try and boot up the application and I'm not sure what it means or how to fix it. It tells me to scan and repair the application but that won't work either. I tried placing the file but it wouldn't let me.
1145 views
Nov 13, 2020 at 05:23 AM

Protect Doesn't Recognise MS Edge

It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.

BoostSpeed 11 still doesn't appear to recognise Microsoft Edge

1091 views
Nov 12, 2020 at 08:55 PM

Запретить windows кэшировать в mapping file

Добрый день. Иногда падают игры, с ошибкой на нехватку оперативной памяти. Проблема в том что WIN10 уводит в кэш слишком много памяти. На скриншоте 1.6гб+, но это после чистки. было 10гб.
Используя RAMMap.exe выявил что те 10гб были схаваны Mapped File: standby. Почистил. но сейчас опять память утекает..
как можно отключить это недоразумение?
Служба SuperFetch отключена. Что еще может жрать память и не отдавать её?
1065 views
Nov 12, 2020 at 02:19 PM

Siempre se sobrecalienta el cpu al 100%

Veo en el admin de tareas y dice integrator.exe usando 56% de cpu y optimizer.exe dice 23%
1114 views
Nov 12, 2020 at 01:32 PM

Intermittent PC Crashes/Freezes

To Whom It May Concern,

I intiated my original correspondence on the 5th November as indicated below:

I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.

This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!

I await an update at your earliest available opportunity.

Kind regards,

Ian

Ian R. W

Dear Ian,

Thank you for posting your question on our forum.

The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.

Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.

Running the command "sfc / scannow" in CMD under the admin might help with the issue.

You can also send to our support logs with system information and event viewer so that we can better understand the issue.

To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.

To get logs from event viewer, please do the following:

1. Press the key combination "Windows" + "X"

2. Select "Event Viewer"

3. Expand the "Custom Viewer" subsection

4. Select "Administrative Events"

5. Expand the "Action" menu

6. Click on "Save all events in custom view as ..."

7. Save log to PC

If you need any further assistance or have any other questions, please do not hesitate to contact us.

Upvote (0)

Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,

Your prompt response to my request for technical support is very much appreciated.

Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.

At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.

I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.

Kind regards

Ian

Ian R. W

[/private]
Dear Suzanna,

Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.

Kind regards,

Ian

Ian R. W

1059 views
Nov 12, 2020 at 01:09 PM

battery not charging

my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.

1355 views
Nov 12, 2020 at 12:01 PM

playing videos

This morning I could play videos from the internet and tonight I'm not able to. Please give me suggestions to fix this.

The error message says:

(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss


Lori
1002 views
Nov 12, 2020 at 01:29 AM

archivos duplicados

como eliminar archivos duplicados
1072 views
Nov 10, 2020 at 11:53 AM

Не очищается корзина

Не могу очистить корзину,требуется разрешение администратора компьютера,кроме меня больше нет пользователей на этом компьютере !
Восстановить файлы не получается,очистить нельзя,вырезать тоже,проверял компьютер на вирусы и делал проверку дисков,всё хорошо
Что делать,как очистить корзину ? Меня это очень раздражает !
Windwos 10 x64

1082 views
Nov 09, 2020 at 07:12 AM

Security Center in Vista

I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?

1164 views
Jun 06, 2020 at 09:43 PM

broken link to update 16 June

The link for your current update is broken

1164 views
Jun 16, 2020 at 12:36 AM

Постоянная загруженность диска на 100%

Добрый день!

Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?

1164 views
Jul 10, 2021 at 05:56 PM

Auslogics 12 Downloading

I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.
1163 views
Jan 21, 2021 at 12:04 AM

deleted activation informations of windows10 pc

I installed Auslogics bootSpeed 12 Pro, and after first scan, reboot windows 10 pc(Dell XPS 13 9505).
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.

(1)‪C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)

(2)In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.

(3)Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.

(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.

1161 views
Oct 19, 2021 at 07:05 AM

Internet explorer

I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.

1160 views
Jul 15, 2020 at 07:27 PM

lock screen password

how can i return my window lock screen password
1160 views
Aug 03, 2020 at 10:12 PM

Error mesage

I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.

1158 views
Oct 04, 2020 at 05:57 PM

Unable to make screen lighter or darker

I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
1158 views
Oct 14, 2020 at 09:09 AM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Sound not working

Sound is not playing from built in speakers. It only plays through 3.5mm jack.
1157 views
Sep 16, 2019 at 03:22 PM

C922 Pro stream webcam

After initial total scan of my system the webcam is not working anymore.
Any idea ??
1156 views
Aug 24, 2021 at 11:31 AM

No Disk DeFrag menu option in Auslogics 10

I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".

what's going on?

thanks,

Brian

1155 views
Oct 31, 2021 at 03:18 PM

sound buged

buged dont fix
1155 views
Jun 02, 2020 at 01:41 PM

My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP

I work from home of course and my Lenovo is running extremely slow and making noise like it is trying to complete an update. I do have one update 2021-05 Cumulative Update for Windows 10 Version 20H2 for x86-based Systems (KB5003173) that everytime I try to install it is errors out. I have received two different error codes (0x8007007e), I ran the windows trouble shooter, and now I am receiving error code (0x8000ffff). I downloaded your Auslogics and did a full scan for all the free options you offer and still am receiving this error message and my PC is super slow
1154 views
May 12, 2021 at 08:22 PM

Недопустимое значение реестра при попытке открыть JPG файлы

Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.

1152 views
Dec 04, 2019 at 06:36 AM

file backup

posso cambiare la posizione del salvataggio dei backup generati da software?

1151 views
Nov 21, 2019 at 06:37 AM

Logitech C920s

I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.

I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.

So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.

Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
1151 views
Oct 23, 2020 at 11:28 AM

Location in Privacy setting

I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You
1150 views
Dec 27, 2020 at 06:48 AM

Ipv4 and Ipv6 not connected

my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?
1148 views
Dec 17, 2020 at 10:22 PM