Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
If I have purchased Boost speed 12, Do I need the registry cleaner product also?
playing videos
The error message says:
(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss
Lori
Boost Speed 12 running very hot
Not really settings. See below!
When running, Boost Speed 12 R 12.0.0.2 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?
Buddy Seigel
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Deep disk cleaner
Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.
Cordialement
Laurent MESNIER
File and Printer Sharing
Win10
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
uninstall
Напортачил...
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
The Select full screen/ minimise button is no longer showing at the top right of the screen.
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
Windows Startup
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
Defragmenter related question
There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb