1897 questions
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I dont turn off laptop at night. I run it with lid closed when in use.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
Is Auslogics Registry Cleaner suitable for servers?
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
my hard drive keeps chattering windows 10 can you help??????
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I have problems Closing the lid does not work. I set it to sleep or shut down neither of them worked.When I tried to find a solutions
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
Здравствуйте.
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
Windows 11 prro keeps logging me off. I have tried several fixes from internet, but nothing works. Pleassse help. Thank you, Charles
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
PLEASE HELP!!!!!!! I INSTALLED A PROGRAM CALLED "QUANTUM RESONANCE MAGNETIC ANALYZER" ON COMPUTER EVERY THING INSTALLED FINE, IT CREATED A DESK ICON ETC... BUT WHEN I TRY TO OPEN THE PROGRAM UP THE MESSAGE IN THE SUBJECT ABOVE IS WHAT I KEEP GETTING. I TRIED EVERYTHING!!!!!!!!!!!!!!!! I RESTARTED THE COMPUTER, I DID THE SFL /SCANNOW THING, I DISABLED MY VIRUS PROTECTION, I UPDATED DRIVERS BUT NOTHING!!!!!!! IM TRULY AT A LOSS IM VERY FRUSTRATED BECAUSE I PAID OVER 100 DOLLARS FOR THE PROGRAM AND I CANT USE IT! SO CAN YOU PLEASE HELP? OR WILL I HAVE TO TRY TO SEND THE PROGRAM BACK? I HAVE HP COMPUTER WINDOWS 10 MICROSOFT THANK YOU! MY NAME IS KENNETH BINGHAM
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Критическая
критическая ошибка Web Camsc-13HDL 11939NUSB\ViD_2232&...... Ошибка пользователя Appication Error
Fortnite
I have pretty good fps in fortnite but constant fps drops and stutters, I tried everything i found on the internet but seems like nothing works
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
mcafee popouts stupid
how can disable or uninstall mcafee that seems to have been install by ms in windows10?
уведомления
Здравствуйте Очень часто всплывает уведомление Обноружено высокое потребление ресурсов ЧТО это икак исправить? Зарание спасибо!
BSOD
Im getting Kmode_Eception not handled, System Service Eception and Unexpcted Kernel Mode Trap when i play game. i couldn't find the problem even i bought your Driver Pro to update all driver it still the same. what is the problem?
Empty Folders Function
Can I safely run an Empty Folder SCAN without deleteing important files like the Document File????????
Windows 7 64 Максимальная
Как полностью обезопасить свой пк и сделать его чище на программном уровне?
Not loading
Dashboard, one click scanner, clean up, etc.etc.etc not loading.
What needs to be done to do so?
Майкрософт офис
После использования Auslogics перестали открываться файлы ексель хотя вордоские файлы продолжают открываться.
How do I fix?
FINDSTR: Cannot open c:\ProgramData\acer\updater2\updater2.xml
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
computer very slow
I have an ASUS laptop computer, about 8 years old and it is as slow as the second coming.
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
Windows Live Affected by first scan
Hi, I ran my first scan yesterday which was fine but now the content in my Windows Live 2012 set-up has been removed - specifically I have lost the folders, and their contents, I set up in my inbox, and I now have only emails in my inbox from the 18.06.2021. Everything else has gone. How can I get it back to where I was yesterday?
Browser Protection
In Advanced Mode.... under Browser Protection.... why does the scan/repair "skip" and not delete some items?
ошибка какая-то
Переодически выдает ошибку, я так понимаю это связанно с каким-то файлом отвечающим за обновление Майкрософт Офиса. Появляется не так, чтобы часто. Может 1 раз при перезапуске компьютера. Как это можно было бы убрать? Переустановить офис, наверное...
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
My mouse freezes, lags which was not doing in the past
I am a long time professional and I am actually quite tech savvy. I use the computer very very clean (obsessive level) But my mouse started to lag recently. I have downloaded Auslogics Pro (thats how we met) Even though I liked the software, it didnt solve the problem.
My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.
I formated everything on my computer (because this was not the case until very recently) but even that didnt help.
What can be the reason?
My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.
I formated everything on my computer (because this was not the case until very recently) but even that didnt help.
What can be the reason?