1859 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
My mouse freezes, lags which was not doing in the past
I am a long time professional and I am actually quite tech savvy. I use the computer very very clean (obsessive level) But my mouse started to lag recently. I have downloaded Auslogics Pro (thats how we met) Even though I liked the software, it didnt solve the problem.
My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.
I formated everything on my computer (because this was not the case until very recently) but even that didnt help.
What can be the reason?
My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.
I formated everything on my computer (because this was not the case until very recently) but even that didnt help.
What can be the reason?
Browser Protection
In Advanced Mode.... under Browser Protection.... why does the scan/repair "skip" and not delete some items?
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Windows Live Affected by first scan
Hi, I ran my first scan yesterday which was fine but now the content in my Windows Live 2012 set-up has been removed - specifically I have lost the folders, and their contents, I set up in my inbox, and I now have only emails in my inbox from the 18.06.2021. Everything else has gone. How can I get it back to where I was yesterday?
Windows 10 Action Center is not working
As you see in the attached screenshot, I cannot make use of the action center. What would be the solution to this? Thank you.
computer very slow
I have an ASUS laptop computer, about 8 years old and it is as slow as the second coming.
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
системные файлы windows 10
могу ли, Я, обнаружить вашей программой приложение в системе ,или файл запускающий вредоносное приложение, изменяющий СИСТЕМНЫЕ файлы ! Или напишите как его (подлеца) обнаружить!!! Сканирование антивирусом не предлогать! У меня изначально стоял надёжный антивирус .
благодарю за ответ...
благодарю за ответ...
BNP detected fatal error
I am having blue screen issues. BNP detected fatal error occurs every time I restart but not on shutdown.
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
востоновление системы
добрый день, как ваша система моет навредить компьютеру или системе, она внесла изменения на пк отключила достуа к микрофону и камере, но я включил, я попытался сделать востоновления виндоус но очень долго востонавливаетет реестьр, я так и не дождался и перегрузил пк и теперю боюсь что ваша программа внесла изменения и придется переустоновливать виндоус, что делать, так вроде вск работает, как проверть, правильно ли работает щас система? спасибо
BSOD
Im getting Kmode_Eception not handled, System Service Eception and Unexpcted Kernel Mode Trap when i play game. i couldn't find the problem even i bought your Driver Pro to update all driver it still the same. what is the problem?
How do I fix?
FINDSTR: Cannot open c:\ProgramData\acer\updater2\updater2.xml
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
SurfShark VPN problem with DNS wire???? with BS and Surfshark .3.0
Hi,let say I like your software very much. Please show me how to end error message form BS "interupted DNS" from Surfshark
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
Про производительность компьютера
Дорогие разработчики программы Auslogics BootSpeed, у меня проблема.
Я хотел повысить fps помоему я снял что-то с диспетчера задач,и вводил команды в консоль в игре CS:GO в мастерской карте BENCHMARK. И, до этих изменении у меня было около 70-100 fps, а сейчас fps 40-60. Что мне делать? Подскажите, пожалуйста!
Я хотел повысить fps помоему я снял что-то с диспетчера задач,и вводил команды в консоль в игре CS:GO в мастерской карте BENCHMARK. И, до этих изменении у меня было около 70-100 fps, а сейчас fps 40-60. Что мне делать? Подскажите, пожалуйста!
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
Location is turned off and GREYED OUT.
Everytime I install BoostSpeed 12, in Windows the Location services on Windows 11/10 are greyed out automatically in the Operating System due to the presence of this third-party software. Due to this glitch, I am not able to toggle the Location services on and off and also cannot change any settings related to it. I have tried every hack and registry fix that Microsoft tells me to do and still nothing...location is GREYED OUT
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7