1859 questions
not fixed
Hi I found your website on the promise that it would sort out the 8000ffff eroor? It hasn't, can it be sorted?
Windows 10 Reliability Monitor issue.
I am using Windows 10 20H2 version and BoostSpeed 12 new version.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
takes 7 hours to defrag 18 files on a portable HD
Why is it taking 8 hours to only defrag 18 files on an "easystore" 5TB portable HD. 790 files on this HD is said to be fragmented. at this speed, it will take me months to defrag this HD. can I speed up the defrag speed?
Using Dedicated Graphics Card
Hello there,
I've got a problem with switching to my dedicated graphics card. For some reason games like CS:GO tend to run on integrated graphics. I've tried everything such as going to Nvidia Contol Panel and choosing cs:go, and setting it on my Nvidia card. When I go to Graphics settings and choose CS:GO it says Intel(R) HD Graphics 3000 for Power Saving and High Performance (which it shouldn't be like this) . I've installed the latest version of my Nvidia Card ( which is 391.35). The only way I can use my Nvidia Graphics for CS:GO is that I have to disable Intel(R) HD Graphics 3000 in Device Manager (which then I'm limited to 60HZ and can't change color settings)
I'm using an Asus Laptop( Asus K53SV)
Here is some information about the hardware that I'm using:
Geforce GT 540M
Intel(R) HD Graphics 3000
I hope you guys can help me with this and have a good day :)
I've got a problem with switching to my dedicated graphics card. For some reason games like CS:GO tend to run on integrated graphics. I've tried everything such as going to Nvidia Contol Panel and choosing cs:go, and setting it on my Nvidia card. When I go to Graphics settings and choose CS:GO it says Intel(R) HD Graphics 3000 for Power Saving and High Performance (which it shouldn't be like this) . I've installed the latest version of my Nvidia Card ( which is 391.35). The only way I can use my Nvidia Graphics for CS:GO is that I have to disable Intel(R) HD Graphics 3000 in Device Manager (which then I'm limited to 60HZ and can't change color settings)
I'm using an Asus Laptop( Asus K53SV)
Here is some information about the hardware that I'm using:
Geforce GT 540M
Intel(R) HD Graphics 3000
I hope you guys can help me with this and have a good day :)
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin
Location in Privacy setting
I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You
Thank You
BoostSpeed 12 clobbers Voice Recognition.
I am running Windows 10 Build 19042-2009 BoostSpeed 12 Pro. I use Microsofts Voice Recognition with Language Microsoft Speech Recognizer 8.0 for Windows (English - US). When I installed BoostSpeed and run the scan and resolve. It clobbers Voice Recognition. I get this error message after. "Speech recognition could not start because the language configuration is not supported.The recognizer language must match the language of the user interface." Checking the configuration shows that the language configuration is still what it was before it stopped working.
I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.
Thank you
I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.
Thank you
Headphones connected but no sound
I;ve connected my JBL headphones to my PC but there is still no sound
Slower Internet Speeds
Hello, I have verizon gigabit internet. Since February I built a pc and was enjoying 700 mbps speeds using ethernet connection to my Nighthawk XR500. For the last couple months, I have been experience under 50 mbps speed and cannot figure out why. I have tried updating drivers and software and firmware but nothing has worked. I purchased boostspeed and optimized but has not worked. Any help would be appreciated. I get speeds of around 500 to 600 on my phone.
Unmount drives
Please tell me why on earth your programme needs to unmounts two drives after the defragmentation process, the one (J:\) that has been defragmented and the other one (O:\) that was not touched by any process of the defragmentation. Only restarting the Win10 operating system made the drives be mounted again, even a partitioning programme (MiniTool) did not find the drives before restart! Next question: how do I prevent this from happening again?
Thanks for your well appreciated help.
Thanks for your well appreciated help.
HDD Spindown Automatically
Hello, When i restart my computer. hard drive automatically spindown and spinup when system load windows...any suggestion??
Pro Version
Considering the trial version does the job of speeding up my computer, what is the cost of the Pro Version?
acsses denied in changing windows services
hey!
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
cd rom not working or wireless mouse
cd rom or usb for wireless mouse wont work after i did a recovery on my windows 10 laptop
Unwanted sound
A day ago my windows 8.1 laptop started to say a word that sounds like Paul. I was listening to news and it appeared as if scheduled every10 seconds. Now even with no user task running I still hear the word. Any ideas?
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
Empty folder function and Document file
How can I safely run Empty Folder file function without destroying important files, such as Document File???????
Popups
How do I dasable the advertising popups in Boost Speed 12? I already own some of your products and don't want to be bothered with the advertising.
Also, when do you plan to have the problem with Boost Speed Pro resolved what it asks me if I want to activate the Pro version when I already have it?
Also, your subcategory required field above is not appropriate.
Also, when do you plan to have the problem with Boost Speed Pro resolved what it asks me if I want to activate the Pro version when I already have it?
Also, your subcategory required field above is not appropriate.
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Using the registry
Can I use the registry to change a single program not to show the "DO YOU WANT THIS PROGRAM TO CHANGE YOUR" ETC.
Unable to move desktop icons
recently did cleanup and deleted some .ico files. checked Restore and files not located. cannot move desktop icons and a 1-2 minute delay using mouse with no ability to select programs on bootup since Auslogic installed. tried various workarounds via internet to no avail with no help on how to restore missing files. can copy/past icons but not move on desktop. no such problems since last bootup except mouse delay. not able to determine which file to send for review.
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
DRIVER UPDATER REFUSES TO CONNECT
Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
Thanks for your help!
James
Quick Links in Word and Excel
How do I shut off the "feature" that wipes out all my quick links in Word, Excel, Etc. If I can't disable that POS feature I will remove your software and never consider upgrading.
disable registeruserdevice
how can i disable registeruserdevice? File does not exist, and ias dangerous
Греется жесткий диск
Последнее время стал сильно греться жесткий диск хотя запустил комьютер 20-30 минут назад, а уже хоть руки грей
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7