1859 questions
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Windows search indexer
Hi there,
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Right Click opens very slowly
Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
internet hızlandırma yaptıgımda hızım düşüyor
internet hızlandırma yaptıgımda hızım düşüyor 50 mbits fiber internetim var manuel ayarları bilmiyorum yardımcı olurmusunuz acaba?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
auslogics driver updater causes WINDOWS 10 to be disabled
I have the Auslogics Driver updater and used it on my ACER laptop , which is only 3 years old.
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Programa não esta fazendo scan
Quando eu peço para fazer varredura o programa interrompe e apresenta o seguinte log
Does disappear language icon ?
Tell me how to retrieve language icon it switches different typewritings?
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Empty Folder Cleaner and Windows
Does the Empty Folders Cleaner differentiate which folders should and should not be deleted in the Windows OC? The tool identifies hundreds in my C drive, and I assume those in the Windows' System, Program Files, Windows32, etc. should NOT be deleted, but I can't tell.
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Content hidden to protect privacy
Deleted files
When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
aidez-moi à installer Windows11 à partir de Winsdows10
Nom de l'appareil Asus-N732V
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
"Location servises managed by your organization"
I need to fix this. Want to be able locate my laptop in case it gets loss
HP x2 210 G2 Detachable PC - Specifications
Hello!
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7