1859 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Windows 10 Pro Licencia Retail - No actualiza versión 21H2 - Error 0x800f0922
Recientemente adquirí Licencia Windows 10 Pro.
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
letters are very thin -hard to read
Dear Sir/Madam
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
HP Envy Desktop 23 No audio devices after windows 10 update
Hello,
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
Fehlermeldung beim Start von Auslogics Disk Defrag Ultimate
Hallo,
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
Windows 10 not shutting down, keeps restarting
When I shut down (even Shift + shutdown or hibernate) the computer (i5-4460 with 16 GB Ram, ASUS H97m PLUS) the PC instantly reboots. Have to do hard shutdown with power button.
I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!
I have recent system images saved but none before the problem started!
Any suggestions? Thank you, David
I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!
I have recent system images saved but none before the problem started!
Any suggestions? Thank you, David
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
Notification for "Safe to Reove"
safe to remove notification does not come on screen when usb devices are removed?
Allow list
What do I have to add to Malewarebytes "allowed" list to get your software to run? If I run Malewarebytes it quarantienes your application.
sound in windows 11 alway from small to big when i play video
The sound in windows 11 alway from small to big when i play video, mp3, and on youtube also, evanthough when i pause for awhile and then I play it also happen the same problem. It disturb me a lot
Could you please help me. Thank you so much
Could you please help me. Thank you so much
About BoostSpeed
Sorry about the bogus Subcategory- apparently I cannot send without one but BoostSpeed is not listed.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Microsoft activation request when there is already validated OEM version on laptop
How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
mistakes
Why does ABBYY FineReader 14 make mistakes in characters when scanning large and clear printed text without interference?
Bootspeed 13 Pro | x64 version
Hello,
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
REQUEST AS IN YESTERDAY.
All your product/services come as individuals and yet the best features are the one recommending one another. My question is, Why don't you make a Premium Product that covers at least three or four at best of those top rated/recommended softwares into one individual "Auslogics Armored AI" or something like that?
Reason I'm asking this, I'm broke.
Reason I'm asking this, I'm broke.
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7