Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Windows 10 Pro Licencia Retail - No actualiza versión 21H2 - Error 0x800f0922
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
HP Envy Desktop 23 No audio devices after windows 10 update
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
Fehlermeldung beim Start von Auslogics Disk Defrag Ultimate
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
letters are very thin -hard to read
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
Windows 10 not shutting down, keeps restarting
I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!
I have recent system images saved but none before the problem started!
Any suggestions? Thank you, David
Notification for "Safe to Reove"
Allow list
sound in windows 11 alway from small to big when i play video
Could you please help me. Thank you so much
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
About BoostSpeed
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
Microsoft activation request when there is already validated OEM version on laptop
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
mistakes
hardware suggestion
Bootspeed 13 Pro | x64 version
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.