1859 questions
Sound Fades In and Out
With hte update of Windows t0 the sound on my computer fades in and out. I have used the troubleshooter; however, it is of no help at all.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
Windows 11
I have a Lenova Yoga 510 14ISK i7-6500
Apparently my machine is not compatible for the Windows 11 upgrade.
What do I need to do to make it compatible?
Apparently my machine is not compatible for the Windows 11 upgrade.
What do I need to do to make it compatible?
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
Slow Word response
I am having problems with Windows Word and Excvel !
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
Caps lock key not working or lighting up aslo volume keys are a bit touch and go as to if they going to work.
Caps lock key not working or lighting up aslo volume keys are a bit touch and go as to if they going to work. Any help or on getting these working would be much appreciated.
ошибки в дисках C, D
Здравствуйте! Почему программа находит ошибки в дисках, но не указывает и не исправляет? Спасибо
Partition management
I want to change the partitions on an SSD that i use for instant backup. I was hoping Boostspeed had this functionality.
If it exists, please point me to it.
Thanks
Ed
If it exists, please point me to it.
Thanks
Ed
Fix Broken Shortcuts
How does one fix/repair broken shortcuts. Auslogics gets hung up when using the Stability function.
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
Long Boot time and black screen while booting
I have a ACER Nitro 5 laptop (windows 10 home original), mainly for entry level gaming. I am using laptop/desktop from last 12 years and I have moderate knoweldge on S/w issues, how to keep the laptop fast (by defragmenting, registry cleaning etc.). Recently I am facing Boot issues thats getting frustrating. Initially it started with long booting time, it was taking 7-10 minutes to reach to user account (Pin), and during that time the CPU and GPU fan speed was getting super fast (like during heavy usage).
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Task Manager
Hi. I keep getting a report from Auslogics that a "High System Resources aare deteded". Clicking to see more takes me to the tak manager - but I have nno idea which of the dozens of running programss aare essential/nexcessary/vital and which are causing the problem. Can youo give me some guidance?
Donald
Donald
Notifacations
Can we stop the nag notifacations?
I do not need constant reminders that I have 3 questions, now 2. Stop it.
I do not need constant reminders that I have 3 questions, now 2. Stop it.
No photo thumbnails
All my picture files used to disply thumbnails, now just icons.
How do I restore?
How do I restore?
Display issues
I had some security issues and a professional took control of my computer to fix the issues. Now all of my normal icons are much smaller than before. I can change the sixe of text in Word and Firefox, but I don't know how to change the other icon and display sizes.
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
Очистка диска
Как и что лучше всего почистить системный диск. Уже занято более 100ГБ. Все документы/временные файлы/загрузки уже перенесены с диска.
windows 10
Hi, when cleaning up windows 10 by using boostspeed 12, it deletes all my downloaded files and videos ! how to resolve or avoid this ??? Thanks in advance
L Lantveld
L Lantveld
Keep document lists
How can I keep my document lists?
These disappear from my Start/Documents list and the list in each program (Word, Excel).
I have searched and searched and can't find this referenced.
Thank you.
John Zwolanek
Deforest, Wisconsin, USA
Content hidden to protect privacy
Addressing a specific drive
Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
Getting different kinds of BSOD's
Hello and good morning, I'm not very good at softwares and know-how's on PC but I've tried using this program to probably fix the cause of what could be causing the BSOD's on my PC. After I tried to use the Auslogics Driver Updater, I updated some of the drivers and it asked me to restart so I did. After I restarted, the pc kept giving me a BSOD where it was written something like: Boot device inaccessible. So I couldn't even put the password and login properly. I had to restore the data to a certain point so I could get my pc back. I'm not sure what the problem is yet so I decided to write this message to you and ask for a helping hand.
Thank you in advance for your time,
Pedro
Thank you in advance for your time,
Pedro
Unable to open any image file via photos
I am getting an error when i am double clicking an image file, which normally used to open with "photos" app.
The error is "No such interface supported"
The error is "No such interface supported"
BoostSpeed always errors off
I installed 3 times and did 3 scans but each time it said:
Error EDrive not found Exception. Drive could not be found.
What can I do?
Error EDrive not found Exception. Drive could not be found.
What can I do?
Free disk space issue
I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
メモリーを有効利用
CADソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
проблема с компом
здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
external hard drive recovery
so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
printer does not print after running Auslogic
can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogics Boost speed
I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride