1859 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Keep document lists
How can I keep my document lists?
These disappear from my Start/Documents list and the list in each program (Word, Excel).
I have searched and searched and can't find this referenced.
Thank you.
John Zwolanek
Deforest, Wisconsin, USA
Content hidden to protect privacy
Addressing a specific drive
Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
Getting different kinds of BSOD's
Hello and good morning, I'm not very good at softwares and know-how's on PC but I've tried using this program to probably fix the cause of what could be causing the BSOD's on my PC. After I tried to use the Auslogics Driver Updater, I updated some of the drivers and it asked me to restart so I did. After I restarted, the pc kept giving me a BSOD where it was written something like: Boot device inaccessible. So I couldn't even put the password and login properly. I had to restore the data to a certain point so I could get my pc back. I'm not sure what the problem is yet so I decided to write this message to you and ask for a helping hand.
Thank you in advance for your time,
Pedro
Thank you in advance for your time,
Pedro
Unable to open any image file via photos
I am getting an error when i am double clicking an image file, which normally used to open with "photos" app.
The error is "No such interface supported"
The error is "No such interface supported"
BoostSpeed always errors off
I installed 3 times and did 3 scans but each time it said:
Error EDrive not found Exception. Drive could not be found.
What can I do?
Error EDrive not found Exception. Drive could not be found.
What can I do?
Free disk space issue
I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
メモリーを有効利用
ＣＡＤソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
проблема с компом
здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
external hard drive recovery
so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
printer does not print after running Auslogic
can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogics Boost speed
I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7