1897 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Tab Crashes when go to Look at Report from Deep Disk Cleaner
After I run my Auslogics Boostspeed (makes a backup). I go to look at report and get error "Gah. your tab failed" What/Why does this happen? I don't know how to attach the report. Sorry (Old Lady)
Addressing a specific drive
Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
BoostSpeed always errors off
I installed 3 times and did 3 scans but each time it said:
Error EDrive not found Exception. Drive could not be found.
What can I do?
Error EDrive not found Exception. Drive could not be found.
What can I do?
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
проблема с компом
здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
Löschen von Dateien
Hallo
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss
Antwort bitte in deutsch.
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss
Antwort bitte in deutsch.
Auslogics Boost speed
I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
printer does not print after running Auslogic
can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
external hard drive recovery
so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
メモリーを有効利用
ＣＡＤソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
Driver Issues
Hello Dear Sir, Madam,
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
Auligistics Boost Seem to Be Deleting Windows Files
Auligistics Boost Seem to Be Deleting Windows Files, For Example my Searchhost DLL got deleted, stopping aall my searches
Smart Card Service
Hello!
I have encountered the problem with Smart Card Service turning off. And I am actually using a smart card. I keep opening Services menu in windows and turning it on again. (Auto/manual no matter) It works then, but the next day it will be the same issue over and over again.
I suspect that BoostSpeed is turning it off as a matter of "optimisation". Who can I check and make it stop? I need this service running.
Best Regards, Dmitry
I have encountered the problem with Smart Card Service turning off. And I am actually using a smart card. I keep opening Services menu in windows and turning it on again. (Auto/manual no matter) It works then, but the next day it will be the same issue over and over again.
I suspect that BoostSpeed is turning it off as a matter of "optimisation". Who can I check and make it stop? I need this service running.
Best Regards, Dmitry
boost speed 13
When I do a scan, it comes back and tells me xxxx amount of junk to be cleaned and fragmented. When I click recolvder all, 90% of the junk is removed. I cleaned junk files and it said xxxx amount of files and it cleaned all but 91 mg. I therefore have to clean 2 or 3 times to remove all. WHY? I have paid for this version and it is not updated. Please advise.
Doug
Doug
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7