1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Windows 10 Disc Optimizer

I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.

1476 views
May 20, 2020 at 02:09 PM

can't get wifi networks working

wifi wont display networks and wifi wonbt even turn on
1474 views
Jul 08, 2020 at 05:29 PM

Auslogics Driver Updater

Почему ваша программа Driver Updater 1.23.0.2 определяется антивирусом Windows Defender как вирус и автоматически удаляется из системы? Даже установочный фаил скачанный с вашего сайта классифицируется как зловредная программа и сразу удаляется. Почему так происходит?

1471 views
Mar 28, 2020 at 01:52 AM

Malwabyte

Hi when ever I check my computer with malwarebyte it detects my bootspeed as a problem. it deletes bootspeed. Have you come across this problem? How do I fix it?
Thank you

1468 views
Oct 27, 2020 at 11:06 AM

eliminar sistema operativo de windows extra con su aplicacion

queria eliminar un sistema operativo que le agregue accidentalmente pero no me deja al final me tiro error (lo queria destruir) lo estaba buscando para desbloquearlo pero tampoco aparecia asi que mi pregunta es:
como hacer para eliminar el sistema operativo con su aplicacion? porque a decir verdad no quiero formatear mi disco

1465 views
May 09, 2020 at 02:14 PM

Standard SATA AHCI Controller

I successfully uupdated all my outdated drivers using the Update Drivers app, except this one:

When I attempt to update driver for Standard SATA AHCI Controller the boot device becomes unaccessible, and I need to reset the system with restore point.

Do I really need to update it, and if yes then how I can resolve this issue

1461 views
Jul 01, 2020 at 01:12 AM

sound in my PC

The sound in my PC has disappeared all of a sudden. Can you help me fix it? I work with Windows 7 professional and my sound card is Realtek, built on the motherboard.
1461 views
May 09, 2020 at 09:49 PM

first display has unwanted text on it

recently when I start my computer the display show a list of system information on the right side of screen. It does not appear on subeuent pages. I can not get rid of it or find the dourse

1461 views
Feb 16, 2020 at 06:17 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Chrome isn't in Volume Mixer, Windows 10

Just starting today, YouTube, while in Google Chrome with Windows 10, won't play audio. It says the site isn't muted, as well as the browser saying that it allows audio to be played from YouTube. I checked the Volume Mixer, and Chrome won't show up at all.

Any tips/suggestions to get the browser back to Volume mixer?
1456 views
Oct 01, 2019 at 03:05 AM

RAM

Hi, what benefits I would get if I increase thr RAM to 16GB instead of 8GB as it is now? would that enhance the overall performance of my laptop?
Thank you

1450 views
Jun 26, 2020 at 10:13 PM

Swipe Left, esp from rt edge, activates Cortana?

Please tell me how to disable this highly distracting action?
1450 views
Jul 19, 2020 at 12:12 AM

Bluetooth Connectivity

Only getting partcial connectivity on both KOSS wirless speaker and headset.
Currently the headset is showing "Connected Voice".
If disconnected it will show "Driver Error".
Please advise.
Thank you.

1450 views
Aug 04, 2020 at 03:09 PM

социальные сети

при общении в интернете мое изображение удваивается

1449 views
May 25, 2020 at 08:02 AM

Нагрузка диска на 100 процентов

Почему диск нагружается на 100 процентов прошу помочь

1448 views
Mar 13, 2020 at 07:22 PM

NON SI APRE PIU' IMPOSTAZIONI IN WINDOWS

DOPO AVER INSTALLATO AUTOLOGISTICS , IN WINDOWS NON MI SI APRONO PIU' LE IMPOSTAZIONI DI SISTEMA E WINDOWS UPDATE ... CHIEDO CORTESEMENTE UNA RISPOSTA .... GRAZIE 1000
1448 views
Aug 19, 2020 at 04:51 PM

Can't enter settings

Can't enter settings app. Stuck at icon

1446 views
May 22, 2020 at 06:05 AM

ssd disk defrag

Auslogics Disk Defrag does not recognize my c drive as a ssd drive. It recognizes other drives as ssd drives just not the c drive. What do I do?

1444 views
Nov 06, 2019 at 01:56 PM

Unused Applications - Application Logs

When doing an All Areas Scan the Disk Space never is 'Nothing Found' the result because the following files are always there:
C:\Windows\System32\SleepStudy\ScreenOn\ScreenOnPowerStudyTraceSession-2020 How can I delete, disable the folders of these files. I have gone in to the final files and deleted them, at least I think I have, but the early folders are still there and the Application Logs appear again. How do I get rid of or disable these folders? Thanks!
1442 views
Jul 20, 2020 at 01:40 AM

Driver update potential issue

Hi - new customer. Purchased the Driver Update SW. I'm finding that the driver update wants to update my Windows 10 AMD A8-7410 APU with AMD Radeon R5 Graphics even after a successful update. I believe it's not updating successfully even though it indicartes that the update has been successful. Can you help me troubleshoot. What detail do you need from me?
1441 views
May 22, 2021 at 05:20 PM