1859 questions
FIX: bdservicehost high cpu / memory usage
FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
i have a problem that my laptop have a legacy mode bios and i can't activate the virtualisation and i need it to run and android emulator for some programs that don't work for me because i have 32bit systeme .
thank you
thank you
Windows 11
I have just purchased a new Windows 11 laptop. Can I run Boost Speed etc on this and how can I transfer the licences?
Thank You
Thank You
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Delete/clean norton
Why won't Auslogics BoostSpeed clean norton during a scan. We really like your product but don't want lingering files from Norton when it's not being used.
John Smith
John Smith
slow response time on windows right-click
read your article on slow right-click functionality and evaluating your product; where do i find the option to troubleshoot this issue
Extremely Slow
Why is my computer even slower now then it was before I downloaded Auslogics BoostSpeed 12? I always get the following message. "High syste resources usage detected. You may experience PC slowdown."
Lost partition
My SSD took several days to recover, via an automated Microsoft Windows process.
My disk had a C: drive, for OS and D: drive for my files, photo's etc. While the c: drive was recovered, the d: drive has disappeared. How can I recover the D: drive, please?
My disk had a C: drive, for OS and D: drive for my files, photo's etc. While the c: drive was recovered, the d: drive has disappeared. How can I recover the D: drive, please?
Boost speed upgrade to 13
HI
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
nettoyage Registre + defragmentation
Bonjour,
J'ai lu qu'il ne fallait pas trop nettoyer le registre, on risque de perdre des données essentielles. J'ai lu également qu'il ne fallait pas dégragmenter le disque trop souvent, est-ce vrai ?
J'ai lu qu'il ne fallait pas trop nettoyer le registre, on risque de perdre des données essentielles. J'ai lu également qu'il ne fallait pas dégragmenter le disque trop souvent, est-ce vrai ?
VELOCIDADE E ESPAÇO I5
olá, sobre o assunto da firewall a resposta é excelente.
tens alguma informação de como alterar a VELOCIDADE RELOGIO da minha parte.
no entanto MODO JOGO ou BOOST
3 questoes.
pedro andre mendes
map
tens alguma informação de como alterar a VELOCIDADE RELOGIO da minha parte.
no entanto MODO JOGO ou BOOST
3 questoes.
pedro andre mendes
map
Asus boost speed 13 upgrade
I am the Ceo of 4 companies in south africa you can look up mark webb ceo south africa on linkadin I have been using your amazing product for many years please refer to my account the reason i am writing to you is i find the way you go about bringing out boostspeed 13 then giving me a discount is in my opionion not the best way to keep customers comming back
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Mark Webb
CEO
Flexibreaks holidya and travel club
0828515607
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Mark Webb
CEO
Flexibreaks holidya and travel club
0828515607
driver opdater
will your driver updater get the driver for my printer and install
printer is hp deskjet f4100 seris
printer is hp deskjet f4100 seris
BoostSpeed 13 Ansehen der Ergebnisse
Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!
Regards Hans
Im Voraus vielen Dank!!
Regards Hans
printer malfuntion after running Boostspeed 13
After running Boostspeed 13, my printer either stops working with a "user intervention needed" , or it stops printing in color. What settings can I use to avoid this problem? I may have to quit using Boostspeed
My PC crawls after i installed
Hello,
I have using AusLogic Bootspeed for over 6 mths (was on v 12.1.2 and now downlaoded v13
ever since i stalled and used your software My PC runs very very slow. In fact i think your software has drastically
affected my pc. what can be done to make it super fast like it was before installing
I have using AusLogic Bootspeed for over 6 mths (was on v 12.1.2 and now downlaoded v13
ever since i stalled and used your software My PC runs very very slow. In fact i think your software has drastically
affected my pc. what can be done to make it super fast like it was before installing
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
c:\windows\servicing\LCU\* - no cleanup
Hi.
I would like to ask why BootSpeed not have option to perform cleanup of the c:\windows\servicing\LCU\* files?
I would like to ask why BootSpeed not have option to perform cleanup of the c:\windows\servicing\LCU\* files?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7